D-Link xStack DGS-3600 User Manual page 186

The following fields can be set or viewed:
Parameter
Interface Name
IP Address
Hello Interval (1-
18724)
Join/Prune Interval (1-
18724)
State
Click Apply to implement changes made. Click
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Allows the entry of the name of the IP interface for which PIM-DM is to be configured. This
must be a previously defined IP interface.
Displays the IP address for the IP interface named above.
This field allows an entry of between 1 and 18724 seconds and determines the interval
between sending Hello packets to other routers on the network. The default is 30 seconds.
This field allows an entry of between 1 and 18724 seconds. This interval also determines
the time interval the router uses to automatically remove prune information from a branch of
a multicast delivery tree and begin to flood multicast messages to all branches of that
delivery tree. These two actions are equivalent. The default is 60 seconds.
This field can be toggled between Enabled and Disabled using the pull-down menu, and is
used to enable or disable PIM-DM for the IP interface. The default is Disabled.
Show All PIM-DM Interface Entries to return to the PIM-DM Interface Table.
170