D-Link xStack DGS-3600 User Manual page 140

Click to select the default option if this will be the default IPv6 route. Choosing this option will allow the user to configure the
default gateway for the next hop router only.
The following fields can be set:
Parameter Description
IPv6 Address/Netmask
Next Hop Address
Metric (1-65535)
default
Click Apply to implement changes made.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Specify the address and mask information using the format as IPv6 address / prefix
length (IPv6 address is hexadecimal number, prefix length is decimal number, for
example 1234::5D7F/32).
Enter the IPv6 address for the next hop Gateway address in IPv6 format.
The metric representing the number of routers between the Switch and the IPv6 address
above.
Select the default option to define the entry as a 1 hop IPv6 default route.
124