D-Link xStack DGS-3600 User Manual page 206

Figure 10- 18. CPU Interface Filtering Profile Configuration – Ethernet
Parameter
Profile ID (1-5) Type in a unique identifier number for this profile set. This value can be set from 1 - 5.
Type Select profile based on Ethernet (MAC Address), IP address or Packet Content Mask. This will
change the menu according to the requirements for the type of profile.
VLAN Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Source MAC
Destination MAC Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
802.1p Enter a value from 0-7 to specify that the access profile will apply only to packets with this
802.1p priority value.
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
Ethernet type
header.
Click Apply to set this entry in the Switch's memory.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
•
header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet
•
header.
190