D-Link xStack DGS-3600 User Manual page 96

Parameter
VID (VLAN ID)
VLAN Name
Advertisement
Type
Protocol ID
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing
VLAN in the Modify window. VLANs can be identified by either the VID or the VLAN name.
Allows the entry of a name for the new VLAN in the Add window, or for editing the VLAN
name in the Modify window.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Displays the type of protocol associated with this VLAN.
The following parameters allow for the creation of protocol-based VLANs. The Switch supports
14 pre-configured protocol-based VLANs plus one user-defined protocol based VLAN where
the administrator may configure the settings for the appropriate protocol and forwarding of
packets (15 total). Selecting a specific protocol will indicate which protocol will be utilized in
determining the VLAN ownership of a tagged packet. Pre-set protocol-based VLANs on the
Switch include:
port – Using this parameter will allow the creation of a normal 802.1Q VLAN on the Switch.
ip – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in
the packet header is concurrent with this protocol. This packet header information is based on
the Ethernet protocol.
rarp - Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in
the packet header is concurrent with this protocol. This packet header information is defined
by the Reverse Address Resolution (RARP) Protocol.
ipx802dot3 - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information is
defined by Novell NetWare 802.3 (IPX - Internet Packet Exchange).
ipx802dot2 - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information is
defined by Novell NetWare 802.2 (IPX - Internet Packet Exchange).
ipxSnap - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information is
defined by Novell and the Sub Network Access Protocol (SNAP).
ipxEthernet2 - Using this parameter will instruct the Switch to forward packets to this VLAN if
the tag in the packet header is concurrent with this protocol. This packet header information is
defined by Novell Ethernet II Protocol.
appleTalk - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information is
defined by the AppleTalk protocol.
decLAT - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information is
defined by the Digital Equipment Corporation (DEC) Local Area Transport (LAT) protocol.
sna802dot2 - Using this parameter will instruct the Switch to forward packets to this VLAN if
the tag in the packet header is concurrent with this protocol. This packet header information is
defined by the Systems Network Architecture (SNA) 802.2 Protocol.
snaEthernet2 - Using this parameter will instruct the Switch to forward packets to this VLAN if
the tag in the packet header is concurrent with this protocol. This packet header information is
defined by the Systems Network Architecture (SNA) Ethernet II Protocol.
netBios - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information is
defined by the NetBIOS Protocol.
xns - Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in
the packet header is concurrent with this protocol. This packet header information is defined
by the Xerox Network Systems (XNS) Protocol.
80