D-Link xStack DGS-3600 User Manual page 133

3. After changing the route preference value for a specific routing protocol, that protocol needs to be restarted because
the previously learned routes have been dropped from the switch. The Switch must learn the routes again before the new settings
can take affect.
To view the Route Preference Settings window, click L3 Features > Route Preference Settings:
The following fields can be viewed or set:
Parameter
RIP (1-999)
OSPF Intra (1-999)
STATIC (1-999)
OSPF Inter (1-999)
OSPF ExtT1 (1-999)
OSPF ExtT2 (1-999)
Click Apply to implement changes made.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 8- 8. Route Preference Settings window
Description
Enter a value between 1 and 999 to set the route preference for RIP. The lower the value,
the higher the chance the specified protocol will be chosen as the best path for routing
packets. The default value is 100.
Enter a value between 1 and 999 to set the route preference for OSPF Intra. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 80.
Enter a value between 1 and 999 to set the route preference for Static. The lower the value,
the higher the chance the specified protocol will be chosen as the best path for routing
packets. The default value is 60.
Enter a value between 1 and 999 to set the route preference for OSPF Inter. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 90.
Enter a value between 1 and 999 to set the route preference for OSPF ExtT1. The lower
the value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 110.
Enter a value between 1 and 999 to set the route preference for OSPF ExtT2. The lower
the value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 115.
117