D-Link xStack DGS-3600 User Manual page 182

This window allows the configuration of IGMP for each IP interface configured on the Switch. IGMP can be configured as
Version 1, 2 or 3 by toggling the Version field using the pull-down menu. The length of time between queries can be varied by
entering a value between 1 and 31,744 seconds in the Query Interval field. The maximum length of time between the receipt of a
query and the sending of an IGMP response report can be varied by entering a value in the Max Response Time field.
The Robustness Variable field allows IGMP to be 'tuned' for sub-networks that are expected to lose many packets. A high value
(max. 255) for the robustness variable will help compensate for 'lossy' sub-networks. A low value (min. 2) should be used for less
'lossy' sub-networks.
The following fields can be set:
Parameter
Interface Name
IP Address
Version
Query Interval
Max Response Time
Robustness Variable
Last Member Query
Interval
State
Click Apply to implement changes made.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Displays the name of the IP interface that is to be configured for IGMP. This must be a
previously configured IP interface.
Displays the IP address corresponding to the IP interface name above.
Enter the IGMP version (1, 2 or 3) that will be used to interpret IGMP queries on the
interface.
Allows the entry of a value between 1 and 31744 seconds, with a default of 125 seconds.
This specifies the length of time between sending IGMP queries.
Sets the maximum amount of time allowed before sending an IGMP response report. A
value between 1 and 25 seconds can be entered, with a default of 10 seconds.
A tuning variable to allow for subnetworks that are expected to lose a large number of
packets. A value between 1 and 255 can be entered, with larger values being specified for
subnetworks that are expected to lose larger numbers of packets.
Specifies the maximum amount of time between group-specific query messages, including
those sent in response to leave group messages. A value between 1 and 25. The default is 1
second.
This field can be toggled between Enabled and Disabled and enables or disables IGMP for
the IP interface. The default is Disabled.
166