D-Link xStack DGS-3600 User Manual page 274

Auth Fail Counts the number of times that the state machine transitions from AUTHENTICATING to
HELD, as a result of the Backend Authentication state machine indicating authentication failure
(authFail = TRUE).
Auth Reauth Counts the number of times that the state machine transitions from AUTHENTICATING to
ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
Auth Start Counts the number of times that the state machine transitions from AUTHENTICATING to
ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
Auth LogOff Counts the number of times that the state machine transitions from AUTHENTICATING to
ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.
Authed Reauth Counts the number of times that the state machine transitions from AUTHENTICATED to
CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
Authed Start Counts the number of times that the state machine transitions from AUTHENTICATED to
CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.
Authed LogOff Counts the number of times that the state machine transitions from AUTHENTICATED to
DISCONNECTED, as a result of an EAPOL-Logoff message being received from the
Supplicant.
Responses Counts the number of times that the state machine sends an initial Access-Request packet to
the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state).
Indicates that the Authenticator attempted communication with the Authentication Server.
AccessChallenges Counts the number of times that the state machine receives an initial Access-Challenge packet
from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE
state). Indicates that the Authentication Server has communication with the Authenticator.
OtherReqToSupp Counts the number of times that the state machine sends an EAP-Request packet (other than
an Identity, Notification, Failure, or Success message) to the Supplicant (i.e., executes txReq on
entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
NonNakRespFrom Counts the number of times that the state machine receives a response from the Supplicant to
Sup an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp
becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and
the response is not an EAP-NAK). Indicates that the Supplicant can respond to the
Authenticator's chosen EAP-method.
Bac Auth Success Counts the number of times that the state machine receives an Accept message from the
Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to
SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication
Server.
Bac Auth Fail Counts the number of times that the state machine receives a Reject message from the
Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to
FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
258