D-Link xStack DGS-3600 User Manual page 197

The page shown below is the IPv6 configuration window.
This screen will aid the user in configuring the Switch to mask packet headers beginning with the offset value specified. The
following fields are used to configure the IPv6:
Parameter Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 14.
Profile ID (1-14)
Type Select profile based on Ethernet (MAC Address), IP or IPv6 address. This will change the
menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Class Checking this field will instruct the Switch to examine the class field of the IPv6 header. This
class field is a part of the packet header that is similar to the Type of Service (ToS) or
Precedence bits field in IPv4.
Flowlabel Checking this field will instruct the Switch to examine the flow label field of the IPv6 header.
This flow label field is used by a source to label sequences of packets such as non-default
quality of service or real time service packets.
Source IPv6 Mask The user may specify an IP address mask for the source IPv6 address by checking the
corresponding box and entering the IP address mask.
Destination IPv6 The user may specify an IP address mask for the destination IPv6 address by checking the
Mask corresponding box and entering the IP address mask.
Click Apply to implement changes made.
To view the configurations set for a previously created access profile, return to the Access Profile Table and click the
under the Display heading, corresponding to the access profile for which to view configurations. A window similar to the one
below will be displayed.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 10- 4. Access Profile Configuration (IPv6)
Figure 10- 5. Access Profile Entry Display – (Ethernet)
181
button