Cisco ASA 5505 Configuration Manual page 727

Chapter 34 Configuring Filtering Services
•
•
To modify a filtering rule, select it and click Edit to display the Edit Filter Rule dialog box for the
Step 8
specified filtering rule.
Make the required changes, then click OK to close this dialog box.
Step 9
Click Apply to save your changes.
Step 10
Filtering the Rule Table
To find a specific rule if your rule table includes a lot of entries, you can apply a filter to the rule table
to show only the rules specified by the filter. To filter the rule table, perform the following steps:
Click Find on the toolbar to display the Filter toolbar.
Step 1
Choose the type of filter from the Filter drop-down list:
Step 2
•
•
•
•
•
•
For Source, Destination, Source or Destination, and Service filters, perform the following steps:
Step 3
a.
b.
Step 4 For Rule Type filters, choose the rule type from the list.
Step 5 For Query filters, click Define Query. To define queries, see the
page
Step 6 To apply the filter to the rule table, click Filter.
Step 7 To remove the filter from the rule table and display all rule entries, click Clear.
Step 8 To show the packet trace for the selected rule, click Packet Trace.
Step 9 To show and hide the selected rule diagram, click Diagram.
To remove a filter rule and place it elsewhere, click Cut.
Step 10
To copy a filter rule, click Copy. Then to move the copied filter rule elsewhere, click Paste.
Step 11
OL-20339-01
Click OK to close this dialog box.
Click Apply to save your changes.
Source—Displays rules based on the specified source address or hostname.
Destination—Displays rules based on the specified destination address or hostname.
Source or Destination—Displays rules based on the specified source or destination address or
hostname.
Service—Displays rules based on the specified service.
Rule Type—Displays rules based on the specified rule type.
Query—Displays rules based on a complex query composed of source, destination, service, and rule
type information.
Enter the string to match using one of the following methods:
– Type the source, destination, or service name in the adjacent field.
Click the ellipses to open a Browse dialog box from which you can choose existing services, IP
–
addresses, or host names.
Choose the match criteria from the drop-down list. Choose is for exact string matches or contains
for partial string matches.
34-12.
Filtering URLs and FTP Requests with an External Server
"Defining Queries" section on
Cisco ASA 5500 Series Configuration Guide using ASDM
34-11