Table of Contents
Advertisement
Prestige 202 ISDN Router
12.7 Upload Firmware
Menu 24.7 – System Maintenance – Upload Firmware allows you to upgrade the firmware and
the configuration file via the console port. The firmware and configuration file may also be
uploaded via FTP. There are 2 components in the system: the router firmware and the
configuration file, as shown in the next figure. Restoring the configuration as in Menu 24.6 copies
your (customized) backup configuration from your computer to the Prestige. Note you must be
able to access the SMT to do this. Uploading the configuration file via Menu 24.7.2 on the other
hand rewrites all configuration data, as well as system-related data, the error log and the trace log.
If you forget your password for instance you will need to use Menu 24.7.2 as you can use this
method in debug mode. However, your customized settings will be reset to the default values
(including your password being reset to 1234, the Prestige default password).
Figure 12-17 Menu 24.7 – System Maintenance – Upload Firmware
12.7.1 Upload Router Firmware
The firmware is the program that controls the functions of the Prestige. Menu 24.7.1 shows you
the instructions for uploading the firmware. If you answer yes at the prompt, the Prestige will go
into debug mode. Follow the procedure below to upload the firmware:
1. Enter "atur" after the "Enter Debug Mode" message.
2. Wait for the "Starting XMODEM upload" message before activating XMODEM
upload on your terminal.
3. After successful firmware upload, enter "atgo" to restart the Prestige.
12-16
Menu 24.7 - System Maintenance - Upload Firmware
1. Upload Router Firmware
2. Upload Router Configuration File
Enter Menu Selection Number:
System Maintenance
Advertisement
Table of Contents
Troubleshooting
