General Ethernet Setup; Protocol Dependent Ethernet Setup; Figure 2-19 Menu 3 - Ethernet Setup; Figure 2-20 Menu 3.1 - General Ethernet Setup - ZyXEL Communications Prestige 202 User Manual

Prestige 202 ISDN Router

2.13.1 General Ethernet Setup

This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches.
If you need to define filters, please read the Filter Set Configuration chapter first, then return to
this menu to define the filter sets.

2.14 Protocol Dependent Ethernet Setup

l
For TCP/IP Ethernet setup refer to Chapter 3 – Internet Access Application.
l
For remote node TCP/IP configuration refer to Chapter 5 – Remote Node TCP/IP
Configuration.
2-26
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 2-19 Menu 3 – Ethernet Setup
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
Output Filter Sets:
protocol filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 2-20 Menu 3.1 – General Ethernet Setup
2
device filters=
device filters=
Hardware Installation and Initial Setup