Prestige 202 ISDN Router
This figure shows you how to apply NAT to the remote node in Menu 11.1.
Enter 11 from the Main Menu.
Step 1.
Move the cursor to the Edit IP field, press [space bar] to toggle the default No to Yes,
Step 2.
then press [Enter] to bring up Menu 11.3 – Remote Node Network Layer Options.
The following table describes the options for Network Address Translation.
7-6
Press ENTER to Confirm or ESC to Cancel:
Figure 7-4 Applying NAT for Internet Access
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr= 172.16.1.20
Rem Subnet Mask= 255.255.0.0
My WAN Addr= 192.168.1.10
NAT= Full Feature
Address Mapping Set= 4
Metric= N/A
Private= N/A
RIP Direction= Both
Version= RIP-2B
Press ENTER to Confirm or ESC to Cancel:
Figure 7-5 Applying NAT to the Remote Node
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Pri Phone #= 4125678
Sec Phone #=
My Login= N/A
My Password= N/A
My WAN IP Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= 255
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 100
NAT