Figure 12-9 Display For A Successful Manual Call - ZyXEL Communications Prestige 202 User Manual

Internet Setup Test
Ping Host
Reboot System
Command Mode
Manual Call Remote
Node
Host IP Address
The following figure shows an example of a successful connection after selecting option Manual
Call in Menu 24.4.
Start dialing for node <1>
### Hit any key to continue. ###
Dialing chan<2> phone<last 9-digit>:12345
Call CONNECT speed<64000> chan<2> prot<1>
LCP up
CHAP send response
CHAP login to remote OK!
IPCP negotiation started
IPCP up
System Maintenance
screen displays what is happening during the call setup and protocol
negotiation. The following is an example of a successful connection.
This test checks to see if your Internet access configuration has been done
correctly. When this option is chosen, the Prestige places a manual call to the
ISP remote node. If everything is working properly, you will receive an
appropriate response. Otherwise, note the error message and consult your
network administrator.
This diagnostic test pings the host, which determines the functionality of the
TCP/IP protocol on both systems and the links in between.
This option reboots the Prestige.
This option allows you to enter the command mode. It allows you to diagnose
and test your Prestige using a specified set of commands.
If you entered 5 above, then enter the remote node number (with reference to
the remote node listing on Menu 11 – Remote Node Setup) you wish to call.
If you entered 12 above, then enter the IP address of the machine you want
to ping in this field.

Figure 12-9 Display for a Successful Manual Call

Prestige 202 ISDN Router
12-11