Prestige 202 ISDN Router
Step 1.
Click "Transfer", then "Receive File" to display the following screen.
.
Step 2.
Enter a path and name for the rom configuration file on your computer and make sure you
choose the XMODEM Protocol. Then press "Receive".
Step 3.
After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
** Backup Configuration completed. OK.
### Hit any key to continue.###
12.6 Restore Configuration
Enter 6 from Menu 24 – System Maintenance to restore the configuration from your workstation
to the Prestige. Again, you must use the console port and XMODEM protocol to restore the
configuration.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power
failure should occur, your configuration is safe.
Step 1.
Go to Menu 24.6 (shown next).
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
12-14
Figure 12-12 HyperTerminal Screen
Figure 12-13 Successful Backup
Figure 12-14 Restore Configuration
Enter where you want to
place the rom configuration
file on your computer.
Choose the
XMODEM
Protocol.
System Maintenance