Backup Configuration; Figure 12-11 Backup Configuration; Table 12-5 Filename Conventions - ZyXEL Communications Prestige 202 User Manual

FILE TYPE INTERNAL
Configuration Rom-0
File
Firmware Ras

12.5 Backup Configuration

Entering 5 from Menu 24 – System Maintenance allows you to backup the current Prestige
configuration to your workstation. Backup is highly recommended once your Prestige is
functioning properly.
You must perform backup and restore through the console port. Any serial communications
program should work fine; however, you must use XMODEM protocol to perform the
download/upload.
Please note that the terms "download" and "upload" are relative to the workstation. Download
means to transfer from another machine to the workstation, while upload means from your
workstation to another machine.
Step 1. Go to Menu 24.5 (shown next).
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Step 2. Press "Y" to indicate that you want to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications
programs should be similar. Run the HyperTerminal program.
System Maintenance

Table 12-5 Filename Conventions

EXTERNAL
NAME NAME
*.rom
*.bin

Figure 12-11 Backup Configuration

DESCRIPTION
This is the router configuration filename
on the Prestige. Uploading the rom-0 file
replaces the entire ROM file system,
including your Prestige configurations,
system-related data (including the speed
and default password), the error log and
the trace log.
This is the generic name for the ZyNOS
firmware on the Prestige.
Prestige 202 ISDN Router
AT
COMMAND
ATLC
ATUR
12-13