NOTE: Some applications still will not work through NAT even when using types One-to-One
Follow the steps outlined in example 3 above to configure these two menus as follows.
Type: Many-to-Many No Overload
Local IP:
Global IP:
Server Mapping Set= N/A
Press Space Bar to Toggle.
After you have configured this menu, you should see the following screen.
NAT
Figure 7-23 NAT Example 4
and Many-to-Many No Overload mapping types.
Menu 15.1.1.1 –Example4- Rule 1
Start= 192.168.1.10
End
= 192.168.1.12
Start= 10.132.50.1
End
= 10.132.50.3
Press ENTER to Confirm or ESC to Cancel:
Figure 7-24 Example 4 – Menu 15.1.1.1
Prestige 202 ISDN Router
7-23