Table 3-1 Dhcp Ethernet Setup Menu Fields - ZyXEL Communications Prestige 202 User Manual

Prestige 202 ISDN Router
Follow the instructions in the next table on how to configure the DHCP fields.
FIELD
DHCP Setup
DHCP This field enables/disables the DHCP server. If set to Server, your
Prestige will act as a DHCP server. If set to None, the DHCP server will
be disabled. If set to Relay, the Prestige acts as a surrogate DHCP server
and relays requests and responses between the remote server and the
clients.
When set to Server, the following four items need to be set:
Client IP Pool This field specifies the first of the contiguous addresses in the IP address
Starting pool.
Address
Size of Client IP This field specifies the size, or count of the IP address pool.
Pool
Primary DNS Enter the IP addresses of the DNS servers. The DNS servers are passed
Server to the DHCP clients along with the IP address and the subnet mask.
Secondary
DNS Server
Remote If Relay is selected in the DHCP field above, then enter the IP address of
DHCP Server the actual, remote DHCP server here.
3-6

Table 3-1 DHCP Ethernet Setup Menu Fields

DESCRIPTION EXAMPLE
None
Server
(default)
Relay
192.168.1.33
32
Internet Access