Setting Job Skip - Toshiba e-STUDIO6540C Management Manual

2.SETTING ITEMS (ADMIN)
2
Begin exporting the log data.
1) Select the log file format from CSV or XML.
2) Select the log type to export.
3) Press [SAVE] to begin exporting.
You can select only one log type per operation.
Do not remove the USB storage device until the data transfer is complete. Removing the device while data are
being transferred could destroy them or cause a malfunction of the equipment.
3
When exporting is complete, press [OK].
4
Remove the USB storage device from the USB port on the equipment.
 Setting job skip
You can set to skip a copy or print job that failed due some reason and proceed to others.
Item name
JOB SKIP CONTROL
[JOB SKIP CONTROL] is displayed only when the hard disk is installed on the equipment.
For instructions on how to resolve the cause of a skipped copy or print job, refer to the Copying Guide "Chapter 7:
CONFIRMING JOB STATUS" and Printing Guide "Chapter 5: MANAGING PRINT JOBS FROM THE CONTROL
PANEL".
 ON — Press this button to enable the function.
 OFF — Press this button to disable the function.
2 SETTING ITEMS (ADMIN)
Description
GENERAL 75