Fax; Setting The Discard And Reduction Print Option For Rx Print - Toshiba e-STUDIO6540C Management Manual

2 SETTING ITEMS (ADMIN)

FAX

If the FAX Unit and the 2nd Line for FAX Unit are not installed, only [DISCARD] and [REDUCTION] for [RX PRINT] are
available. For details of other fax menus, refer to the Operator's Manual for FAX Unit "Chapter 6: SETTING ITEMS".
 When the FAX Unit is not installed, the options set in this menu are applied to Internet Fax reception jobs.
 Depending on the model, [FAX] is available only when the Scanner Kit or Printer/Scanner Kit is installed.
 For instructions on how to display the FAX screen, see the following page:
 P.47 "Accessing the Admin Menu"
 Setting the discard and reduction print option for RX print
You can set print settings for printing received Internet Fax originals.
Two print settings are available: discard print and reduction print.
DISCARD: ON, OFF
 ON — When originals are up to 10 mm larger than the printing area, the area of the originals that exceeds the paper
printing area is discarded.
 OFF — The received original is printed on two sheets of paper if its length exceeds the paper printing area.
* For discard print setting details, contact your service technician.
REDUCTION: ON, OFF
 ON — If the received original is longer than the recording paper, it will be vertically reduced to 90% to fit on the
recording paper.
 OFF — The received original is printed on two sheets of paper if its length exceeds the recording paper printing area.
1
On the FAX screen, press [RX PRINT].
The RX PRINT screen is displayed.
2
Press [ON] or [OFF] for [DISCARD] and [REDUCTION] as required and press [OK].
The registered options can be confirmed in FUNCTION LIST.
 P.163 "FUNCTION LIST (Administrator)"
98

FAX