Toshiba e-STUDIO6540C Management Manual page 66

2 SETTING ITEMS (ADMIN)
2
Connect your USB storage device in which the language pack is stored to the USB port
on the equipment, and press [OK].
The SELECT A FILE screen is displayed.
For the location of the USB port on the equipment, refer to the Quick Start Guide "Chapter 1:
PREPARATIONS".
3
Select the language pack that you want to install, and press [INSTALL].
The installation confirmation screen is displayed.
4
Press [YES].
The installation begins.
Do not remove the USB storage device until the data transfer is complete. Removing the device while data are
being transferred could destroy them or cause a malfunction of the equipment.
64 GENERAL