1.SETTING ITEMS (USER)
2
Press the portion of the illustration corresponding to the drawer whose paper type you
want to change and press the desired paper type button, then press [OK] to complete
the settings.
The PAPER TYPE screen consists of two sections: THICKNESS and ATTRIBUTE.
Set THICKNESS when using thick paper and recycled paper.
Set ATTRIBUTE when using the paper in the drawer for a specific purpose. For example, if you select [INSERT] for
a drawer, the paper in the drawer will always be used for copy insertion.
The displayed buttons differ depending on the model.
For details of the paper types, refer to the Copying Guide "Chapter 1: BEFORE USING EQUIPMENT".
Paper placed in a drawer set with THICKNESS other than [PLAIN] or [RECYCLED PAPER], or paper
placed in a drawer set with ATTRIBUTE other than [NONE] is out of the scope of the Automatic Paper
Selection (APS).
For details of APS, refer to the Copying Guide "Chapter 3: BASIC COPY MODES".
When an attribute other than [NONE] is set for a drawer, the paper placed in this drawer is out of the scope
of the Automatic Change of Paper Source function.
For details of this function, see the following page:
P.96 "COPY"
1 SETTING ITEMS (USER)
DRAWER
19