2.SETTING ITEMS (ADMIN)
1
On the CONFIRMATION screen of the FACTORY DEFAULT screen, press [OK].
The initialization begins.
If you want to back up the setting data and user data before initialization, use the cloning function to create
clone files.
For details of the cloning function, see the following page:
P.69 "Creating or installing clone files"
When the initialization fails, the message "The process failed." will be displayed. In this case, press
[CLOSE], and perform the operation again.
2
Press [OK] to reboot the equipment.
The equipment reboots.
2 SETTING ITEMS (ADMIN)
FACTORY DEFAULT
127