Setting The Ethernet Speed - Toshiba e-STUDIO6540C Management Manual

2.SETTING ITEMS (ADMIN)
 Setting the Ethernet speed
You can specify the Ethernet speed.
Item name
ETHERNET SPEED
DUPLEX MODE
 The options vary depending on the model.
 Some models have [AUTO] while others have [AUTO (-100MB)] and [AUTO (-1000MB)] as options. If you do not
know the speed of the network you are connected to, select [AUTO], or either [AUTO (-100MB)] or [AUTO (-
1000MB)] depending on your model instead of the button of a specific speed and mode.
 The following models do not enter the Super Sleep mode even if [ENABLE] is selected in the SLEEP/SUPER
SLEEP screen when ETHERNET is set to [AUTO (-1000MB)], [1000BASE FULL], or [1000BASE].
- e-STUDIO456 Series
- e-STUDIO856 Series
- e-STUDIO306LP
 The current Ethernet speed is displayed above the buttons. "Link not detected" is displayed when links failed to be
detected.
 If the network is not stable, turn the power of the equipment OFF and then back ON.
Select the desired combination of communication speed and transmission method.
2 SETTING ITEMS (ADMIN)
Description
NETWORK 91