Setting The Appletalk Protocol - Toshiba e-STUDIO6540C Management Manual

2.SETTING ITEMS (ADMIN)
 When you select [DISABLE] for [SMB PROTOCOL] or [FILE SHARE] for [RESTRICTION], the Save as File to MFP
Local function is disabled.
 If this equipment is set to log on to the domain in the SMB Session of TopAccess (administrator mode) but
"Workgroup" is displayed, logging on to the domain network has failed. In that case, check whether the Windows
Server and the TopAccess SMB Session settings are correct.
 If you set "Domain" for Log-on setting in the TopAccess (administrator mode) SMB Session, and power ON this
equipment or press [APPLY NOW] after changing the network settings of this equipment, the equipment logs on to
the Windows domain network.
 You can enter only alphanumeric characters and "-" (hyphen) for [NetBIOS NAME].
 Do not enter an IP address that starts with "0" (i.e. "0.10.10.10"), "127" (i.e. "127.10.10.10"), or "224" (i.e.
"224.10.10.10") in [WINS PRIMARY] and [WINS SECONDARY]. If you enter such an address, the equipment
cannot communicate with the WINS server.
 If you enter "0.0.0.0" for [WINS PRIMARY] and [WINS SECONDARY], this equipment will not use the WINS server.
 When [DYNAMIC] or [NO AUTO IP] is selected for [ADDRESS MODE] in the TCP/IP settings, this equipment can
acquire the IP address for [WINS PRIMARY] and [WINS SECONDARY] from the DHCP server.
 Setting the AppleTalk protocol
The AppleTalk protocol must be enabled and properly set to enable AppleTalk printing from a Macintosh computer.
Item name
ENABLE APPLETALK
DEVICE NAME
DESIRED ZONE
When you press [DEVICE NAME] or [DESIRED ZONE], the on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following page:
 P.154 "On-screen keyboard"
 ENABLE — Press this button to use the AppleTalk protocol.
 DISABLE — Press this button to disable the AppleTalk protocol.
Press this button to enter the device name of this equipment.
Press this button to enter the AppleTalk zone name. If your AppleTalk network has not been configured
with a zone, enter the default zone name "*".
2 SETTING ITEMS (ADMIN)
Description
NETWORK 89