Change User Password - Toshiba e-STUDIO6540C Management Manual

CHANGE USER PASSWORD

When the MFP Local Authentication function is used, administrators can change the authentication password assigned for
each user in case it is forgotten.
[CHANGE USER PASSWORD] is available only when the MFP Local Authentication function is enabled. This function
can be enabled from TopAccess administrator mode. For details, refer to the TopAccess Guide "Chapter 8:
[Administration] Tab Page".
For instructions on how to display the CHANGE USER PASSWORD screen, see the following page:
 P.47 "Accessing the Admin Menu"
1
On the CHANGE USER PASSWORD screen, set a new password and complete the
setting.
1) Press [USER NAME] to enter the user name for which the password is to be changed.
2) Press [NEW PASSWORD] to enter the new password.
3) Press [RETYPE NEW PASSWORD] to enter the new password again.
4) Press [OK].
The password is now changed.
 When you press [USER NAME], [NEW PASSWORD] or [RETYPE NEW PASSWORD], the on-screen
keyboard is displayed.
For details of the on-screen keyboard, see the following page:
 P.154 "On-screen keyboard"
 The input password appears as asterisks (*) in the [NEW PASSWORD] and [RETYPE NEW PASSWORD]
boxes.
2 SETTING ITEMS (ADMIN)

CHANGE USER PASSWORD

121