Setting The Tcp/Ip Protocol (Ipv6) - Toshiba e-STUDIO6540C Management Manual

2 SETTING ITEMS (ADMIN)
 Setting the TCP/IP protocol (IPv6)
You can set the TCP/IP v6 protocol.
In IPv6 setting operation, you can enable or disable the IPv6 protocol in this equipment, as well as set the IPv6 address,
for example, by selecting the addressing mode.
How the IPv6 address is acquired depends on the addressing mode you select.
 When you select [MANUAL]:
You assign the IPv6 address, prefix and default gateway manually. In this mode, it is possible to register one IPv6
address.
 P.81 "Setting the IPv6 protocol manually"
 When you select [STATELESS]:
The IPv6 address is acquired automatically from the DHCPv6 server and routers. In this mode, it is possible to register
up to nine IPv6 addresses.
 P.82 "Setting the IPv6 protocol automatically (in a stateless network environment)"
Up to seven IPv6 addresses can be acquired from routers. One IPv6 address can be obtained from the DHCPv6
server. And, one link-local address is generated automatically.
 When you select [STATEFUL]:
The IPv6 address is automatically acquired from the DHCPv6 server. In this mode, it is possible to register one IPv6
address.
 P.84 "Setting the IPv6 protocol automatically (in a stateful network environment)"
If Duplicate Address Detection (DAD) detects duplicate addresses, the message "IPv6 ADDRESS CONFLICT" is
displayed on the touch panel.
80 NETWORK