Setting The Status Message; Setting The Auto Clear Function; Managing The Option Licenses - Toshiba e-STUDIO6540C Management Manual

2 SETTING ITEMS (ADMIN)
 Setting the status message
You can have a status message displayed at the bottom of the touch panel, notifying the occurrence of specified events,
such as paper empty and toner low.
Press [ON] or [OFF] for each status message and press [OK].
Item name
TONER NEAR EMPTY MESSAGE
PAPER EMPTY MESSAGE
LEFT DRAWER (LCF) PAPER
EMPTY MESSAGE
The status message "LEFT DRAWER (LCF) PAPER EMPTY MESSAGE" applies only to models with the Tandem
Large Capacity Feeder installed.
 Setting the auto clear function
You can set how long the machine waits before clearing the previous operation left uncompleted on the control panel.
Press the desired period of time (in seconds). If you want to disable the Auto Clear function, press [NO LIMIT].
Selecting [NO LIMIT] does not clear the control panel for any mode including the USER FUNCTIONS, JOB STATUS,
and TEMPLATE screens.
 Managing the option licenses
You can view product information, such as the license ID for certain options. You can also install these options on the
equipment if necessary.
 P.60 "Viewing product information"
 P.61 "Installing an option"
For installation, be sure to follow the service technician's instructions.
Viewing product information
1
On the LICENSE MANAGEMENT screen, select the option for which you want to
confirm product information, and press [DETAILS].
The LICENSE DETAILS screen is displayed.
60 GENERAL
Enabling this option displays a message at the lower left of the screen when toner is low in a
toner cartridge.
Enabling this option displays a message at the lower left of the screen when there is no paper
in a drawer.
Enabling this option displays a message at the lower left of the screen when there is no paper
in the left tray of the Tandem Large Capacity Feeder.
Description