Machine Safety; Tools; Head Cleaning Tools (3.2.10); Pressure Pad Replacement Kit - IBM System/32 Introduction And Maintenance Manual

3.2.0 MAINTENANCE
3.2.1 Machine Safety
The 33FD can be damaged by improper opera-
tion or servicing techniques. Caution notices
throughout the section warn of hazard areas.
The 33FD contains plastic materials that could
be damaged by a wide variety of chemicals; for
example, IBM cleaning fluid.
To avoid damage to the leadscrew and carriage:
Lubricate the leadscrew only with a light film
I BM No.6 oil when the head carriage is
replaced.
To avoid damage to the head:
Clean only with isopropyl alcohol and a
clean cloth after removing the diskette (3.2.10).
3.2.2 Tools
CE Alignment Tool (PIN 2200698)
The CE alignment tool is used for the following:
- Alignment of the read head by adjusting the
read head to track O.
Adjustment of the phototransistor assembly
by mechanical alignment.
3.2.3 Head Cleaning Tools (3.2.10)
Brush (PIN 2200106)
Isopropyl alcohol (PIN 2200200)
Cloth (PIN 2108930)
3.2.3.1 Pressure Pad Replacement
Kit
FBM 2200751
33FD Diskette Drive 3-9