Table of Contents
Advertisement
o
11. If the half line space print feature is installed,
all printer diagnostics should be run at this
time.
012. If the dual case keyboard/display feature is
installed, run diagnostics CRT-1 to CRT-4.
While diagnostic CRT-3 is running, you
should be able to display upper and lower
case characters by pressing the CODE key.
I/O Features
If your System/32 has the Mag Card Unit (IBM
5321) feature, go to the installation instructions
(Appendix A-1) in the
System/32 Mag Card Unit
Attachment Theory-Diagrams Manual,
SY34-0068.
If your System/32 has the Data Recorder (IBM
129/1 BM 5496) feature, go to the installation
instructions in the
System/32 Data Recorder
Attachment Theory-Diagrams Manual,
SY31-0452,
Appendix.
If your System/32 has the Magnetic Character
Reader (I BM 1255) feature, go to the installation
instructions in Appendix A of the
System/32 1255
Attachment Feature Theory-Diagrams,
SY31-0468.
To Complete the Installation
CAUTION
Please alert the customer to the following
procedures:
a. The System/32 should not be moved without
prior preparation by a customer engineer. This
applies to moves within the installation such as
room to room, by elevator, etc, as well as by
truck or other conveyance. The primary area
of damage would be the disk drive if the
actuator lock and the spindle lock were not in
the locked position. Contact your CE for
details.
b. To prevent diskette damage, show the System/32
operator how to properly insert a diskette into
the diskette drive.
c. At this time, a system configuration should be
performed. Go to page C-1 O.
o
1. Turn the system over to the customer.
o
2. Fill out any locally required systems
installation logs.
o
3. Record on your I R all problems encountered
and notify your branch office that the instal-
lation is complete according to local
procedures.
I nstallation Instructions
C-9
Advertisement
Table of Contents
