HP HSR6800 Configuration Manual page 443

Destinations : 5
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2001:1::/64
NextHop : 2001:1::1
Interface : GigabitEthernet2/1/1
Destination: 2001:1::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2012:1::/64
NextHop : 2001:1::2
Interface : GigabitEthernet2/1/1
Destination: FE80::/10
NextHop : ::
Interface : NULL0
[MCE] display ipv6 routing-table vpn-instance vpn2
Routing Table :
Destinations : 5
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2002:1::/64
NextHop : 2002:1::1
Interface : GigabitEthernet2/1/2
Destination: 2002:1::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2012::/64
NextHop : FE80::200:5EFF:FE01:1C03
Interface : GigabitEthernet2/1/2
Destination: FE80::/10
NextHop : ::
Interface : NULL0
The output shows that the MCE has learned the private route of VPN 2 through RIPng. The
MCE maintains the routes of VPN 1 and those of VPN 2 in two different routing tables. In this
way, routes from different VPNs are separated.
3. Configure routing between the MCE and PE 1:
# The MCE is connected to PE 1 through subinterfaces. On the MCE, configure subinterfaces
GigabitEthernet 2/1/3.1 and GigabitEthernet 2/1/3.2.
[MCE] interface gigabitethernet 2/1/3.1
[MCE-GigabitEthernet2/1/3.1] vlan-type dot1q vid 10
[MCE-GigabitEthernet2/1/3.1] ipv6 address 2001:2::3 64
[MCE-GigabitEthernet2/1/3.1] quit
[MCE] interface gigabitethernet 2/1/3.2
[MCE-GigabitEthernet2/1/3.2] vlan-type dot1q vid 20
[MCE-GigabitEthernet2/1/3.2] ipv6 address 2002:2::3 64
[MCE-GigabitEthernet2/1/3.2] quit
# On PE 1, configure subinterface GigabitEthernet 2/1/1.1 and GigabitEthernet 2/1/1.2.
Routes : 5
Routes : 6
435
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Static
Preference: 60
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : RIPng
Preference: 100
Cost : 1
Protocol : Direct
Preference: 0
Cost : 0