Configuring Vpls Instance Attributes - HP HSR6800 Configuration Manual

Step
4. Set the maximum number of
MAC addresses that the
device can learn for the
VPLS instance.
5. Configure the device to drop
packets with unknown
source MAC addresses after
it has learned the maximum
number of MAC addresses
for the VPLS instance.

Configuring VPLS instance attributes

Step
1. Enter system view.
2. Enter VSI view.
3. Specify the upper speed limit
for the VPLS instance.
4. Specify the broadcast
suppression ratio for the
VPLS instance.
5. Specify the multicast
suppression ratio for the
VPLS instance.
6. Specify the unknown unicast
suppression ratio for the
VPLS instance.
7. Specify the encapsulation
type of the VPLS instance.
8. Set the MTU of the VPLS
instance.
9. Set the description of the
VPLS instance.
10. Shut down the VPLS service
of the VPLS instance.
Command
mac-table limit mac-limit-number
mac-table limit drop-unknown
Command
system-view
vsi vsi-name
bandwidth vpn-speed
broadcast-restrain ratio
multicast-restrain ratio
unknown-unicast-restrain ratio
encapsulation { bgp-vpls |
ethernet | vlan }
mtu mtu
description text
shutdown
210
Remarks
Optional.
The default limit is 16384.
Optional.
By default, the device forwards
packets with unknown source
MAC addresses after it has
learned the maximum number of
MAC addresses.
Remarks
N/A
N/A
Optional.
102400 kbps by default.
Optional.
5 percent by default.
Optional.
100 percent by default.
Optional.
100 percent by default.
Optional.
vlan by default, which
corresponds to the VSI PW
encapsulation type of tagged.
Optional.
1500 bytes by default.
Optional.
No description set by default.
Optional.
By default, the VPLS service of a
VPLS instance is enabled.