HP HSR6800 Configuration Manual page 180

# Configure interface POS 5/1/1, and enable MPLS.
[P] interface pos 5/1/1
[P-POS5/1/1] link-protocol ppp
[P-POS5/1/1] ip address 10.1.1.2 24
[P-POS5/1/1] mpls
[P-POS5/1/1] quit
# Configure interface POS 5/1/0, and enable MPLS.
[P] interface pos 5/1/0
[P-POS5/1/0] link-protocol ppp
[P-POS5/1/0] ip address 10.2.2.2 24
[P-POS5/1/0] mpls
[P-POS5/1/0] quit
# Create a static LSP for forwarding packets from PE 1 to PE 2.
[P] static-lsp transit pe1_pe2 incoming-interface pos 5/1/1 in-label 200
outgoing-interface pos 5/1/0 out-label 201
# Create a static LSP for forwarding packets from PE 2 to PE 1.
[P] static-lsp transit pe2_pe1 incoming-interface pos 5/1/0 in-label 101
outgoing-interface pos 5/1/1 out-label 100
4. Configure PE 2:
# Configure the LSR ID and enable MPLS globally.
<Sysname> system-view
[Sysname] sysname PE2
[PE2] interface loopback 0
[PE2-LoopBack0] ip address 10.0.0.3 32
[PE2-LoopBack0] quit
[PE2] mpls lsr-id 10.0.0.3
[PE2] mpls
[PE2-mpls] quit
# Enable L2VPN and MPLS L2VPN.
[PE2] l2vpn
[PE2-l2vpn] mpls l2vpn
[PE2-l2vpn] quit
# Configure interface POS 5/1/1.
[PE2] interface pos 5/1/1
[PE2-POS5/1/1] link-protocol ppp
[PE2-POS5/1/1] quit
# Configure interface POS 5/1/0 and enable MPLS.
[PE2] interface pos 5/1/0
[PE2-POS5/1/0] link-protocol ppp
[PE2-POS5/1/0] ip address 10.2.2.1 24
[PE2-POS5/1/0] mpls
[PE2-POS5/1/0] quit
# Create a remote connection from CE 2 to CE 1, using the interface connected to CE 2 as the
incoming interface and that connecting the P device as the outgoing interface, setting the
incoming label to 201 and the outgoing label to 101.
[PE2] ccc ce2-ce1 interface pos 5/1/1 in-label 201 out-label 101 out-interface pos
5/1/0
5. Configure CE 2:
172