HP HSR6800 Configuration Manual page 408

Step
2. Create an IS-IS process for
an IPv6 VPN instance and
enter IS-IS view.
3. Configure a network entity
title.
4. Enable the IPv6 capacity for
the IS-IS process.
5. Redistribute the VPN routes.
6. Configure a filtering policy to
filter the redistributed routes.
7. Return to system view.
8. Enter interface view.
9. Enable IPv6 for the IS-IS
process on the interface.
For more information about IPv6 IS-IS, see Layer 3—IP Routing Configuration Guide.
Configuring EBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 BGP-VPN
instance view.
4. Configure the PE as the
EBGP peer.
5. Redistribute the VPN routes.
6. Configure a filtering policy to
filter the routes to be
advertised.
7. Configure a filtering policy to
filter the received routes.
Command
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
ipv6 enable
ipv6 import-route protocol
[ process-id ] [ allow-ibgp ] [ cost
cost | [ level-1 | level-1-2 |
level-2 ] | route-policy
route-policy-name | tag tag ] *
ipv6 filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name |
route-policy route-policy-name }
export [ protocol [ process-id ] ]
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number
ipv6-family vpn-instance
vpn-instance-name
peer ipv6-address as-number
as-number
import-route protocol
[ process-id [ med med-value |
route-policy route-policy-name ]
* ]
filter-policy { acl6-number |
ipv6-prefix ip-prefix-name }
export [ direct | isisv6 process-id
| ripng process-id | static ]
filter-policy { acl6-number |
ipv6-prefix ip-prefix-name }
import
400
Remarks
N/A
Not configured by default.
Disabled by default.
Optional.
By default, IS-IS does not
redistribute routes of any other
routing protocol.
If you do not specify the route
level in the command, the
command redistributes routes to
the level-2 routing table by
default.
Optional.
By default, IPv6 IS-IS does not
filter redistributed routes.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
N/A
By default, No route redistribution
is configured.
Optional.
By default, BGP does not filter the
routes to be advertised.
Optional.
By default, BGP does not filter the
received routes.