HP HSR6800 Configuration Manual page 270

Hide thumbs Also See for HSR6800:
Table of Contents

Advertisement

Step
3.
Configure an RD for the VPN
instance.
4.
Configure a description for
the VPN instance.
Associating a VPN instance with an interface
After creating and configuring a VPN instance, associate the VPN instance with the interface
connected to the CE. Any LDP-capable interface can be associated with a VPN instance. For
information about LDP-capable interfaces, see "Configuring basic MPLS."
To associate a VPN instance with an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Associate a VPN instance
with the interface.
NOTE:
The ip binding vpn-instance command deletes the IP address of the current interface. You must
re-configure an IP address for the interface after configuring the command.
Configuring route related attributes for a VPN instance
The device processes VPN route advertisement as follows:
When a VPN route learned from a site gets redistributed into BGP, BGP associates it with a
route target extended community attribute list, which is usually the export target attribute of the
VPN instance associated with the site.
The VPN instance determines which routes it can accept and redistribute according to the
import-extcommunity in the route target.
The VPN instance determines how to change the route targets attributes for routes to be
advertised according to the export-extcommunity in the route target.
To configure route related attributes for a VPN instance:
Step
1.
Enter system view.
2.
Enter VPN instance view.
3.
Enter IPv4 VPN view.
Command
route-distinguisher
route-distinguisher
description text
Command
system-view
interface interface-type
interface-number
ip binding vpn-instance
vpn-instance-name
Command
system-view
ip vpn-instance
vpn-instance-name
ipv4-family
262
Remarks
A VPN instance takes effect only
after you configure an RD for it.
Before configuring an RD, you
cannot configure any other
parameters for the VPN instance
except a reserved VLAN and a
description.
Optional.
The description should contain
the VPN instance's related
information, such as its
relationship with a certain VPN.
Remarks
N/A
N/A
No VPN instance is associated
with an interface by default.
Remarks
N/A
N/A
Optional.

Advertisement

Table of Contents
loading

Table of Contents