HP HSR6800 Configuration Manual page 319

[PE1-tunnel-policy-gre1] quit
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] route-distinguisher 100:1
[PE1-vpn-instance-vpn1] vpn-target 100:1 both
[PE1-vpn-instance-vpn1] tnl-policy gre1
[PE1-vpn-instance-vpn1] quit
[PE1] interface gigabitethernet 2/1/1
[PE1-GigabitEthernet2/1/1] ip binding vpn-instance vpn1
[PE1-GigabitEthernet2/1/1] ip address 10.1.1.2 24
[PE1-GigabitEthernet2/1/1] quit
# Configure PE 2.
[PE2] tunnel-policy gre1
[PE2-tunnel-policy-gre1] tunnel select-seq gre load-balance-number 1
[PE2-tunnel-policy-gre1] quit
[PE2] ip vpn-instance vpn1
[PE2-vpn-instance-vpn1] route-distinguisher 100:2
[PE2-vpn-instance-vpn1] vpn-target 100:1 both
[PE2-vpn-instance-vpn1] tnl-policy gre1
[PE2-vpn-instance-vpn1] quit
[PE2] interface gigabitethernet 2/1/1
[PE2-GigabitEthernet2/1/1] ip binding vpn-instance vpn1
[PE2-GigabitEthernet2/1/1] ip address 10.2.1.2 24
[PE2-GigabitEthernet2/1/1] quit
# Configure CE 1.
<CE1> system-view
[CE1] interface gigabitethernet 2/1/1
[CE1-GigabitEthernet2/1/1] ip address 10.1.1.1 24
[CE1-GigabitEthernet2/1/1] quit
# Configure CE 2.
<CE2> system-view
[CE2] interface gigabitethernet 2/1/1
[CE2-GigabitEthernet2/1/1] ip address 10.2.1.1 24
[CE2-GigabitEthernet2/1/1] quit
After completing the configurations, execute the display ip vpn-instance command on the
PEs to view the configuration of the VPN instance. Use the ping command to test connectivity
between the PEs and their attached CEs. The PEs can ping their attached CEs. Take PE 1 as
an example:
[PE1] display ip vpn-instance
Total VPN-Instances configured : 1
VPN-Instance Name
vpn1
[PE1] ping -vpn-instance vpn1 10.1.1.1
PING 10.1.1.1: 56
Reply from 10.1.1.1: bytes=56 Sequence=1 ttl=255 time=27 ms
Reply from 10.1.1.1: bytes=56 Sequence=2 ttl=255 time=33 ms
Reply from 10.1.1.1: bytes=56 Sequence=3 ttl=255 time=7 ms
Reply from 10.1.1.1: bytes=56 Sequence=4 ttl=255 time=29 ms
Reply from 10.1.1.1: bytes=56 Sequence=5 ttl=255 time=9 ms
--- 10.1.1.1 ping statistics ---
RD Create Time
100:1 2006/08/13 09:32:45
data bytes, press CTRL_C to break
311