HP HSR6800 Configuration Manual page 142

Label Advertisement Mode
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism
Session existed time
LDP Basic Discovery Source
Addresses received from peer: (Count: 2)
2.1.1.1
----------------------------------------------------------------------
Peer LDP ID
TCP Connection
Session State
Session FT Flag : Off
Reconnect Timer : ---
Negotiated Keepalive Timer
Keepalive Message Sent/Rcvd
Label Advertisement Mode
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism
Session existed time
LDP Extended Discovery Source
Addresses received from peer: (Count: 2)
4.1.1.1
----------------------------------------------------------------------
Execute the display mpls ldp lsp command on Router B. The output shows that Router C sent
label mapping messages to Router B and established an LDP LSP.
[RouterB] display mpls ldp lsp
----------------------------------------------------------------------
SN DestAddress/Mask
----------------------------------------------------------------------
1 1.1.1.1/32
2 2.2.2.2/32
3 3.3.3.3/32
4 3.3.3.3/32
----------------------------------------------------------------------
A '*' before an LSP means the LSP is not established
A '*' before a Label means the USCB or DSCB is stale
7. Verify the configuration:
Execute the display mpls lsp command on Router B. The output shows that the LDP LSP from
Router B to Router C is nested within the MPLS TE tunnel. The outgoing interface of the LDP
LSP is the MPLS TE tunnel interface.
[RouterB] display mpls lsp include 3.3.3.3 32 verbose
----------------------------------------------------------------------
: Downstream Unsolicited
: Basic
: 000:01:48
: GigabitEthernet2/1/1
1.1.1.1
: 3.3.3.3:0
: 2.2.2.2 <- 3.3.3.3
: Operational
: 45 Sec
: 411/411 (Message Count)
: Downstream Unsolicited
: Extended
: 000:01:42
: Remote peer: 1
3.3.3.3
LDP LSP Information
In/OutLabel
NULL/3
3/NULL
NULL/3
1024/3
134
(DDD:HH:MM)
Local LDP ID : 2.2.2.2:0
Session Role : Passive
MD5 Flag : Off
Recovery Timer : ---
(DDD:HH:MM)
Next-Hop In/Out-Interface
2.1.1.1 -------/GE2/1/1
127.0.0.1 -------/InLoop0
10.1.1.1 -------/Tun4
10.1.1.1 -------/Tun4