HP HSR6800 Configuration Manual page 397

Step
1. Enter system view.
2. Create an IPv6 IS-IS
process for a VPN instance
and enter IS-IS view.
3. Configure a network entity
title for the IS-IS process.
4. Enable the IPv6 capacity for
the IS-IS process.
5. Return to system view.
6. Enter interface view.
7. Enable the IPv6 capacity for
the IS-IS process on the
interface.
For more information about IPv6 IS-IS, see Layer 3—IP Routing Configuration Guide.
Configuring EBGP between a PE and a CE
1. Configure the PE:
Step
1. Enter system view.
2. Enable BGP and enter BGP
view.
3. Enter IPv6 BGP-VPN
instance view.
4. Configure the CE as the
VPN EBGP peer.
5. Redistribute the routes of the
local CEs.
6. Configure a filtering policy to
filter the routes to be
advertised.
7. Configure a filtering policy to
filter received routes.
2. Configure the CE:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 BGP subaddress
family view.
4. Configure the PE as the
EBGP peer.
Command
system-view
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
ipv6 enable
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number
ipv6-family vpn-instance
vpn-instance-name
peer ipv6-address as-number
as-number
import-route protocol
[ process-id ] [ med med-value |
route-policy route-policy-name ]
*
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ direct | isisv6 process-id
| ripng process-id | static ]
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
Command
system-view
bgp as-number
ipv6-family
peer ipv6-address as-number
as-number
389
Remarks
N/A
Perform this configuration on
PEs. On CEs, create a normal
IPv6 IS-IS process.
Not configured by default.
Disabled by default.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
N/A
A PE must redistribute the routes
of the local CEs into its VPN
routing table so that it can
advertise them to the peer PE.
Optional.
By default, BGP does not filter
routes to be advertised.
Optional.
By default, the PE does not filter
received routes.
Remarks
N/A
N/A
N/A
N/A