HP HSR6800 Configuration Manual page 399

Step
5. Enter BGP-VPNv6
subaddress family view.
6. Set the default value of the
local preference.
7. Set the default value for the
system MED.
8. Configure a filtering policy to
filter routes to be advertised.
9. Configure a filtering policy to
filter received routes.
10. Apply a filtering policy for the
peer.
11. Apply an IPv6-prefix list for
the peer to filter
received/advertised routes.
12. Specify not to change the
next hop of a route when
advertising it to a peer.
13. Specify the preference value
for the routes received from
the peer.
14. Configure BGP updates to
the peer to not carry private
AS numbers.
15. Apply a routing policy for the
peer.
16. Enable route target filtering
for received BGP-VPNv6
subaddress family routes.
17. Configure the local PE as the
route reflector and specify
the peer as the client.
18. Enable route reflection
between clients.
Command
ipv6-family vpnv6
default local-preference value
default med med-value
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ direct | isisv6 process-id
| ripng process-id | static ]
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
peer ip-address filter-policy
acl6-number { export | import }
peer ip-address ipv6-prefix
prefix-name { export | import }
peer ip-address
next-hop-invariable
peer ip-address preferred-value
value
peer ip-address public-as-only
peer ip-address route-policy
route-policy-name { export |
import }
policy vpn-target
peer ip-address reflect-client
reflect between-clients
391
Remarks
N/A
Optional.
100 by default.
Optional.
By default, the default value of the
system MED is 0.
Optional.
By default, the PE does not filter
routes to be advertised.
Optional.
By default, the PE does not filter
received routes.
Optional.
By default, no filtering policy is
applied for a peer.
Optional.
By default, no IPv6 prefix list is
applied for a peer.
Optional.
By default, a device uses its
address as the next hop when
advertising a route to its EBGP
peer.
Optional.
0 by default.
Optional.
By default, a BGP update carries
private AS numbers.
Optional.
By default, no routing policy is
applied for a peer.
Optional.
Enabled by default.
Optional.
No route reflector or client is
configured by default.
Optional.
Enabled by default.