Buell 2008 XB SERIES Electrical Diagnostics Manual page 42

Charging System (Part 1 of 2)
Perform Milliampere Draw Test
Perform Total Current Draw Test.
1-28 2008 Buell XB Diagnostics: Starting / Charging
Charge or replace as required.
Inspect Voltage Regulator.
See Voltage Regulator Inspection.
PASS
PASS
Record measurement.
PASS
Whenever a charging system
component fails a test and is
STOP
replaced, re-test the system to
be sure the problem has been
corrected.
Go to Charging
System Test
(Part 2 of 2).
Test Battery.
Disconnect Regulator.
Does milliampere draw drop?
YES
Replace grounded stator.
5312
NOTE
Isolate damaged wiring or
excessive accessories.
FAIL
Correct as
required.
5306
FAIL
NO
Isolate damaged
component or wiring.
5308
FAIL
5310
fc01591_en