Buell 2008 XB SERIES Electrical Diagnostics Manual page 25

Table of Contents

Advertisement

Nothing Clicks: Starter Test 4 (Part 2 of 2)
Turn off Engine. Shift
Transmission out of Neutral.
With clutch disengaged
(pulled in) Start the Engine.
Does the Engine Start?
Yes
System
functioning
normally.
Yes
Test for continuity from
connector [95B] terminal
4
"2" to chassis Ground.
Is there continuity?
Yes
Disconnect ECM
connector [11].
Measure continuity from
4
connector [95B] terminal
"1" to connector [11B]
terminal "2".
Is there continuity?
Yes
Replace ECM.
Yes
Start the Engine.
Does the Engine start?
Yes
No
Disconnect Clutch
switch connector [95].
Check for continuity
between terminal "1"
4
and terminal "2" of
connector [95A] with the
clutch disengaged
(pulled in).
relay socket terminal could
Is there continuity?
No
Disconnect ECM connector
Replace
Clutch
Switch.
between Start Relay socket
terminal "85" and connector
5168
4
No
relay socket terminal could
Repair
open.
1711
Replace ECM.
No
Repair open.
1722
1711
Make sure the Transmission is in Neutral.
Is the Neutral Lamp on?
No
Test the Start Relay. Refer to 1.5
DIAGNOSTICS/
TROUBLESHOOTING.
Did the Start Relay test out good?
Yes
No
Is 12V present on Start
Replace
Relay terminal "86" with
Start
the Engine Stop Switch in
Relay.
the RUN position and the
Start Switch pressed?
NOTE
Depending on relay used,
be shown as "1" or "R".
Yes
[10] (BLK). Test for
continuity on (GN/O)
4
[10B] terminal "7". Is there
continuity?
NOTE
Depending on relay used,
be shown as "2" or "P".
Yes
No
Repair
open.
1722
1721
2008 Buell XB Diagnostics: Starting / Charging 1-11
No
Disconnect Neutral Switch
connector [131]. Connect [131B]
4
to Ground.
Does the Neutral Lamp turn ON?
Yes
Check for
continuity from
connector [131B]
terminal "A" to
Chassis Ground.
Is continuity
present?
Yes
Replace
Neutral
5832
Switch.
5157
No
Disconnect Right Hand Controls
connector [22]. Test for continuity
between terminal "1" and terminal
"2" of connector [22B] with the
Start Switch pressed.
Is there continuity?
Yes
No
Replace Start
Repair open in
Switch.
(BK/R) circuit
terminal "1".
5832
5831
fc01588_en
No
Repair
open.
1712
No
Repair
open.
1712

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents