Breakout Box; General - Buell 2008 XB SERIES Electrical Diagnostics Manual

BREAKOUT BOX

GENERAL

PART NUMBER
B-48115 BREAKOUT BOX
HD-39978 DVOM
The BREAKOUT BOX (Part No. B-48115) splices into the main
harness. Used in conjunction with a DVOM (Part No. HD-
39978), it allows circuit diagnosis of wiring harness and con-
nections without having to probe with sharp objects.
INSTALLATION
1. Depress latches on each side of connectors [10] (black)
and [11] (gray) and detach connectors from the Electronic
Control Module (ECM).
2. See Figure 2-9, Figure 2-10
Breakout Box to black connector [10].
a. Attach black connector from Breakout Box to corres-
ponding black ECM connector.
b. Attach black connector from the wiring harness to
black connector on Breakout Box.
3. Attach Breakout Box to gray connector [11].
a. Attach gray connector from Breakout Box to corres-
ponding gray ECM connector.
b. Attach gray connector from the wiring harness to gray
connector on Breakout Box.
ed01330
1
4
3
1. ECM
2. Breakout box
3. ECM gray connector
4. ECM black connector
Figure 2-9. ECM and Breakout Box with Connections
(Ulysses)
TOOL NAME
and Figure 2-11. Attach
2
ed01345
2
1
1. Fuse and relay block
2. ECM
3. Breakout box
Figure 2-10. ECM and Breakout Box with Connections
(Lightning)
ed01570
2
1
1. ECM gray connector
2. ECM
3. ECM black connector
4. Breakout box
Figure 2-11. ECM and Breakout Box with Connections
(Firebolt)
REMOVAL
1. See Figure 2-9, Figure 2-10
latches on each side of connectors [10] (black) and [11]
(gray).
2008 Buell XB Diagnostics: Engine Management 2-11
2.6
3
3
4
and Figure 2-11. Depress