Operation Error Messages; Common Messages And Their Remedies - Konica Minolta IF-118 User Manual

Operation Error Messages

9 Operation Error Messages
9.1

Common Messages and Their Remedies

Message
*COMM.ERROR*
XXXX Server
*CANNOT CONNECT*
XXXX Server
*CANNOT GET IP*
XXXX Server
*DISCONNECT*
XXXX Server
*WRONG PASSWORD*
XXXX Server
*RECEIVE WRONG DATA*
XXXX Server
*MEM.FULL/TX CANCEL*
*MEM.FULL/RX CANCEL*
XXXX Server
IF-118
Cause
Communication is not
possible because of
some problem in the
copier or due to the
condition of the network
or server.
A connection to the
server cannot be
established.
The IP address could not
be assigned by the DNS
or DHCP server.
The connection to the
server was cut.
The password is
incorrect, so the copier
could not log onto the
server.
An e-mail message that
cannot be printed by this
copier was received. (For
a file attachment in a
format other than TIFF-
F)
While sending an e-mail,
message the size of the
data for the scanned
image has exceeded the
capacity of the memory.
While receiving an e-mail
message, the size of the
data for the scanned
image has exceeded the
capacity of the memory.
Remedy
Check the transmission
results.
Consult with the network
administrator.
Check that the Ethernet cable
is correctly connected.
(p. 3-1)
Check the settings for the
functions on the "E-MAIL
SETTING 1", "E-MAIL
SETTING 2" and "NETWORK
SETTING" menu. (p. 3-2)
Consult with the network
administrator.
Consult with the network
administrator.
Consult with the network
administrator.
For a POP3 server, check the
settings for the functions on
the "E-MAIL SETTING 2"
menu. (p. 3-18)
Consult with the network
administrator.
Ask the sender to send a
TIFF-F file or text in the
correct format.
Retrieve all received e-mail
messages stored in the
memory.
Retrieve all received e-mail
messages stored in the
memory.
9
9-1