Error Messages; Malfunction Messages - Konica Minolta MagiColor 1600W Service Manual

11. Description of the control panel (magicolor 1650EN)
11.1.3

Error messages

Message
CHECK TRAY1
PAPER
(Displaying alter-
nately))
PRESS
MENU/SELECT
I/C LIFE END
AUTH TIMEOUT
AIDC ERROR
BELT ERROR
DUPLEX UNIT
PANEL OPEN
ERROR LOADING
IMAGE
TOP COVER OPEN
PAPER JAM
XXXX
PUT "SIZE" "TYPE"
IN TRAY 1
PUT "SIZE" "TYPE"
IN TRAY 2
X TONER LIFE END
REPLACE X
X TONER MISSING
X TONER OUT
11.1.4

Malfunction messages

For details of malfunction messages and troubleshooting procedures, see "Malfunction
code".
Message
FIRMWARE UPDATE
WRITING ERROR
SERVICECALL XX
62
• Tray 1 is media empty.
• Media has misfed in Tray 1.
• The imaging cartridge has reached the end of its life.
• The user is automatically logged off due to IEEE802.1x port authorization.
• The AIDC sensor has developed a malfunction of some sort.
• The printer detected incorrect image position on the image transfer belt.
• The duplex option cover is open.
• While updating code, an error has occurred.
• The top cover of the machine is open.
• A media jam has occurred at the specified location.
• The media size set from the printer driver is different from the size of media
loaded in Tray 1.
NOTE
• Load the correct paper on Tray1, and press the Menu Select key, then
specify the [SIZE] and [TYPE] of the paper.
• The media size set from the printer driver is different from the size of media
loaded in Tray 2.
NOTE
• This message appears when [MAIN MENU] → [PAPER MENU] →
[INPUT TRAY] → [AUTO CONTINUE] is set to [OFF].
• The X toner cartridge has reached the end of its life.
• The specified color of toner cartridge is not installed.
• The specified color of toner cartridge is empty.
NOTE
• Appears when [MAIN MENU] → [QUALITY MENU] → [TONER OUT
ACTION] is set to [CONTINUE].
• Data cannot be written since the flash memory is damaged.
• The engine or controller is faulty.
Field Service Ver. 1.0 Nov. 2008
Description
Description