Error Messages - Konica Minolta bizhub 4050 User Manual

4.7 Major messages and actions

Error messages

Message
[Configuration of options has
been changed.]
[There is an open compo-
nent.]
[Paper Jam]
[Staple Jam]
[Imaging Unit Installation Er-
ror]
[Install toner cartridge.]
[Maintenance Kit Yield]
[Imaging Unit will require re-
placement soon.]
[Replace Toner]
[Incorrect Toner]
[Incorrect imaging unit]
[Paper Size Mismatch]
[Paper Empty]
[Paper Size/Type Mismatch]
[Output Tray Full]
[Maintenance/Troubleshooting]
Description
The option configuration was
changed while the power was
turned on.
The cover is opened.
A paper jam has occurred.
A staple jam has occurred.
The Imaging Unit is not installed
correctly.
The Toner Cartridge is not in-
stalled correctly.
The maintenance kit has expired.
The operating life of the Imaging
Unit has expired.
Toner is depleted.
An incorrect Toner Cartridge
has been installed.
An incorrect Imaging Unit has
been installed.
Paper of the specified size is not
loaded into a tray.
A print job was executed by
specifying the Manual Feed
Tray from the printer driver, but
no paper was loaded in the Man-
ual Feed Tray.
A print job was executed by
specifying Tray X from the printer
driver, but no paper was loaded
in Tray X.
The size and type of the paper
loaded in the tray specified from
the printer driver are different
from those of the paper loaded in
the tray on the main unit.
The size and type of the paper in
the tray that are specified on the
Control Panel do not match
those of the paper actually load-
ed in the tray.
The amount of paper output to
the Output Tray has reached the
maximum.
Remedy
Restart this machine.
Close the cover.
Check a paper jam location, then re-
move the jammed paper.
Open the cover in the right-hand
side of the Finisher, then remove the
jammed staples.
For details, refer to page 3-15.
Install the Imaging Unit correctly.
Correctly install the Toner Car-
tridge, and close all doors.
For details, refer to page 2-3.
Replace the maintenance kit.
For details, contact your service rep-
resentative.
Replace the Imaging Unit. For de-
tails, refer to page 2-5.
If appears [Contact your service rep-
resentative.], contact your service
representative.
Replace the Toner Cartridge.
For details, refer to page 2-3.
Install a Toner Cartridge which is
our genuine product with the correct
color and correct marketing area.
Install an Imaging Unit which is our
genuine product with the correct
color and correct marketing area.
Load the correct paper into the dis-
played tray.
Load paper into the Manual Feed
Tray.
Load paper into Tray X.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the Control
Panel.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the Control
Panel.
Remove the paper from the Output
Tray.
4
4-16