System Requirements; Accessing Pagescope Light; Using Pagescope Light - Konica Minolta IF-118 User Manual

Overview
❍
SMTP settings
❍ POP3 settings
❍
FTP settings
G Adding/changing e-mail addresses
❍ One-touch dial settings
❍
Speed dial settings
❍ Group dial settings
❍
Speed dial settings (adding an FTP server address)
2.7.2

System Requirements

PageScope Light can be used in the following system environments.
Operating system
Browser
2.7.3

Accessing PageScope Light

Note
In order to use PageScope Light, an IP address, subnet mask, and
gateway setting must already be specified from the control panel of the
copier. For information on specifying these settings, refer to "Network
Settings" on page 3-8.
PageScope Light is accessed directly using a Web browser.
1
Start up your Web browser.
2
Enter the IP address of the copier into the "Address" box, and then
press the [Enter] key.
http://<copier_IP_address>/
❍ (Example) If the copier IP address is 192.168.0.100, enter:
http://192.168.0.100/
3
The PageScope Light screen appears.
2.7.4

Using PageScope Light

PageScope Light is used in the same way as other Internet Web pages.
Click links in the page to jump to that page, and use the [Back] and [Next]
buttons to navigate through pages that have already been loaded.
IF-118
Windows 95 (OSR 2.5), Windows 98,
Windows 98 SE, Windows ME, Windows NT
4.0, Windows 2000, or Windows XP
Microsoft Internet Explorer 4.0 or later
Netscape Navigator 4 or later
2
2-15