Direct Fax Transmission; About Unimessage Pro I-Net Portal; Using Unimessage Pro I-Net Portal - Konica Minolta IF-118 User Manual

Direct Fax Transmission

7 Direct Fax Transmission
Note
In order to perform this operation, the network setting "GATEWAY TX"
must be set to "ENABLE". For details on specifying the gateway
transmission setting, refer to "Network Settings" on page 3-8.
The optional Unimessage Pro I-Net Portal must also be installed on
the computer used to send the document.
7.1

About Unimessage Pro I-Net Portal

For details about specifying the default settings for Unimessage Pro I-Net
Portal, and on using the software, refer to the manual provided with the
software.
7.2

Using Unimessage Pro I-Net Portal

No operation is required from the copier itself. To send a document using
direct faxing, use the Unimessage Pro I-Net Portal software installed on
the computer.
IF-118
7
7-1