Konica Minolta IF-118 User Manual page 75

3
File Destination
Function
Destination Name
FTP Server Address
Directory
Use Proxy
Remote Port Number
E-Mail Notification
Function
Enable Notification
Notification Address
Account Information
Function
Anonymous
Private Site
3-48
Description
This function is used to specify the name for the file destination.
(Up to 20 characters)
This function is used to specify the host name or IP address of
the FTP site where the scan data will be sent. (Up to 64
characters)
This function is used to specify the file path of the directory on
the FTP site where the scan data will be stored. (Up to 128
characters)
This function is used to specify whether or not to access the
FTP site via a proxy server. (For information on proxy server
settings, refer to "FTP & DNS Configuration" on page 3-27.)
This function is used to specify the remote port number (1 to
65535) if a proxy server is not being used. Normally, port
number 21 is used.
Description
This function is used to specify whether or not to send an e-mail
notification when scan data is uploaded to an FTP server.
This function is used to specify the e-mail addresses (up to 10)
where e-mail notifications should be sent. (Up to 64 characters)
Description
This function should be selected if the FTP site is an
anonymous FTP server.
If the FTP site requires user authentification, specify settings
for the following.
User Name: The user name (up to 20 characters) used to log
in to the FTP site
Password: The password (up to 20 characters) associated with
the user name used to log in to the FTP site
Confirm: Used to specify the password for confirmation
Getting Ready
IF-118