Using Scan To Server (Ftp) Operations - Konica Minolta IF-118 User Manual

Using Scan to Server (FTP) Operations

5 Using Scan to Server (FTP)
Operations
Tip
In order to perform this operation, an FTP server address must have
already been specified. Use PageScope Light to specify the settings.
(Refer to "File Destination Setting" on page 3-29.)
A specified recipient can be notified by e-mail of the FTP server
address where a file was uploaded. This setting can be specified using
PageScope Light. (Refer to "File Destination Setting" on page 3-29.)
To cancel a job while the document is being scanned, press the [Stop]
key.
If the job could not be sent, a transmission result report is printed.
To delete a job after it has been scanned, but is still in the queue,
waiting to be sent, press the [FAX SET] key, and then select "CANCEL
RESERV.". (Refer to "Cancelling a Queued Document" on page 6-14.)
IF-118
5
5-1