Konica Minolta IF-118 User Manual page 62

Getting Ready
❍
If only numbers are entered for the address, it will be regarded as
a fax number.
8
Press the [YES] key.
❍ The [YES] key cannot be pressed if the e-mail address does not
contain "@".
9
Press the
select the scan mode ("BASIC" or
"ADVANCED"), and then press the
[YES] key.
❍ If "ADVANCED" is selected, the screen for specifying the
maximum size of document that can be sent appears. (Go to step
10.)
❍
If "BASIC" is selected, go to step 14.
10
Press the
select the maximum document
transmission size (metric models:
"A4", "B4", or "A3"; inch models:
"LT" or "11 × 17"), and then press the [YES] key.
❍
When the [YES] key is pressed, the screen for specifying the
maximum resolution appears.
11
Press the
select the maximum resolution
("FINE" or "S/F"), and then press the
[YES] key.
❍
When the [YES] key is pressed, the screen for specifying the
compression method appears.
12
Press the
select the compression method
("MH", "MR", or "MMR").
13
Press the [YES] key.
The settings are registered. To add information for other speed dial
numbers, repeat steps 4 through 13.
14
Press the [NO] key when you have
finished adding addresses.
The FAX REGISTRATION screen
appears again.
IF-118
and keys to
and keys to
and keys to
and keys to
3
3-35