Introduction Introduction Thank you for choosing a Konica Minolta digital electrophotographic copier. This User’s Guide contains details on the operations required to use the Box functions of bizhub C300 and the precautions on their use. Carefully read this manual before using these functions.
Trademarks and registered trademarks KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Netscape Communications, the Netscape Communications logo, Netscape Navigator, Netscape Communicator, and Netscape are trademarks of Net- scape Communications Corporation.
Page 4
Introduction 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl- core@openssl.org. 5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL”...
Page 5
Redistribution and use in source and binary forms, with or without modifica- tion, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2.
Introduction Contents Introduction ® Energy Star What is an ENERGY STAR Trademarks and registered trademarks ... x-2 Contents ... x-5 About this manual ... x-11 Structure of the manual ...x-11 Notation ...x-12 Screens, windows and dialog boxes ...x-12 Explanation of manual conventions ... x-13 User’s Guides ...
Page 7
Registering boxes ...2-3 Naming documents ...2-4 Saving copies in boxes ...2-5 Settings that can be saved and changed ...2-5 Saving copy documents ...2-6 Saving scans in boxes ...2-9 Using a box destination ...2-9 To save data to a box destination ...2-11 To save data to the specified box ...2-12 Printing a document from a public user box/personal user box...
Page 8
Introduction To specify the “Set Numbering” function ... 3-29 Printing a proof copy ... 3-31 To print a proof copy ... 3-31 Combined printing ... 3-32 To print a document ... 3-33 To change the number of copies ... 3-34 To specify single-sided/double-sided printing ...
Page 9
To specify the file format ...4-20 Routing a document from a system user box Editing document data ...5-2 Routing ...5-3 Routing types ...5-3 Transmission methods ...5-3 Available settings ...5-4 To route data ...5-4 Specifying destinations ...5-6 To specify a program as the destination ...5-6 To select a destination from a group ...5-7 To select a destination from the address book ...5-9 Searching for a destination ...5-10...
Page 10
Introduction Specifying HDD Setting parameters ... 6-15 To check the hard disk capacity ... 6-15 Overwriting temporary data ... 6-16 To overwrite temporary data ... 6-16 Overwriting all data ... 6-19 To overwrite all data ... 6-20 To specify the hard disk locking password ... 6-22 To specify hard disk encryption ...
Page 11
Creating boxes (Administrator mode) ...7-27 To create a box ...7-27 Specifying box administrator settings (Administrator mode) ...7-28 Appendix Error message list ...8-2 Entering text ...8-3 To type text ...8-5 List of available characters ...8-5 Glossary ...8-6 Index ...8-10 x-10 Introduction C300...
Introduction About this manual This user’s guide covers the bizhub C300 box functions. This section introduces the structure of the manual and notations used for product names, etc. This manual is intended for users who understand the basic operations of computers and the machine.
Notation Product name bizhub C300 Microsoft Windows 98 Microsoft Windows Me Microsoft Windows NT 4.0 Microsoft Windows 2000 Microsoft Windows XP When the operating systems above are written together Screens, windows and dialog boxes The touch panel screens and PageScope Web Connection windows and di- alog boxes that appear in this manual show a machine with optional ADF (au- tomatic document feeder) DF-608 installed.
Introduction Explanation of manual conventions Text that appears in this manner describes the function limitations and options required to use certain functions. Text that appears in this manner describes supplemental information, such as precautions, references and actions, relating to steps. Text that appears in this manner provides answers to problems and questions that may occur during...
Page 15
Names highlighted as shown above indicate keys on the control panel, buttons in the touch panel, and the power switches. Touch [Book Copy]. The Book Scanning screen appears. [Booklet Original] is not available if optional saddle stitcher is not in- stalled.
Introduction User’s Guides The following User’s Guides have been prepared for this machine. User’s Guide [Copy Operations] This manual contains details on basic operations and the operating proce- dures for the various copy functions. - Refer to this User’s Guide for details on operating procedures for copy functions, including precautions on installation/use, turning the machine on/off, loading paper, and troubleshooting operations such as clearing paper misfeeds.
User’s Guide [Print Operations] This manual contains details on operating procedures using the standard built-in printer controller. - For details on the printing functions, refer to User’s Guide (PDF file) on User Software CD-ROM. Quick Guide [Print Operations] This manual contains details on operating procedures using the standard built-in printer controller.
Overview of the Box functions Box functions The Box functions allow document data to be saved on the machine’s inter- nal hard disk and later printed. Documents that can be saved are data scanned for copying, received faxes, and saved scan data. To save data to a box, create the box, and then save the data to the specified box.
Overview of the Box functions Types of boxes Various types of boxes are available for different uses. With this machine, 1,000 boxes can be created. The boxes can be given any number between 1 and 999,999,999. - Public/personal user boxes Two box types can be specified: “Public”...
Available Box functions Saving documents Copies made using this machine, sent faxes, and scanned document data can all be saved in boxes. For details on saving using each function, refer to the pages indicated below or refer to the User’s Guide [Facsimile Opera- tions].
Overview of the Box functions Transmitting a document Document data saved in Scan mode can be sent as an e-mail attachment or to an FTP site or a shared folder on a computer. In addition, a fax document saved in a box can be routed. For details, refer to the User’s Guide [Facsimile Operations].
Specifying settings for using the Box functions Before using the Box functions, the following settings should be specified. Registering and specifying settings for boxes Register the boxes where data will be saved. Boxes can be set up by using the machine’s touch panel or by using Page- Scope Web Connection from a Web browser on a computer on the network.
Saving documents Information on saving documents Keep in mind the following information before saving documents. Note For details on saving fax documents, refer to the User’s Guide [Facsimile Operations]. User authentication This machine can be set so that an account or user name and a password must be entered in order to use the machine.
Saving documents Note With user authentication, the only boxes that are displayed are those that can be accessed by the user that is logged on. With account track, all boxes are considered shared boxes. If “Prohibit Functions when Auth. Error” in Administrator mode is set to “Mode 2”...
Naming documents Document data that is saved can be given a name. - The names can contain a maximum of 30 characters. - The names can also be changed after they are saved. - The names can be specified when the data is saved; however, if the data is saved without a name specified, a preset name is applied.
Saving documents Saving copies in boxes Settings that can be saved and changed Within the various functions that can be specified before making copies, there are functions whose settings can be saved and there are functions that cannot be saved but can be set when printing. The functions whose settings can be saved and those that can be changed are listed below.
Saving copy documents The following procedure describes how to save a copy document in a box. Press the [Copy] key in the control panel. Touch [Save in User Box]. A screen for selecting a box appears. Select the box where the data is to be saved. Select the tab that con- tains the box where the data is to be saved, and then touch the button for the box.
Page 30
Saving documents Select whether or not a copy will also be printed when the data is saved. To print a copy, touch [Yes] under “Make copies also?”. Check the name of the document to be saved. Touch [Document Name]. The default name appears beside “Document Name”. –...
Page 31
Specify the necessary copy settings. Load the document into the optional ADF or place it on the original glass. Press the [Start] key in the control panel. – If “Yes” under “Make copies also?” was selected, the scanned doc- ument is copied and the document data is saved in the specified box.
Saving documents Saving scans in boxes Scanned images can be saved in boxes. Box destinations can be registered in the address book, or a box destination can be specified directly. The following procedure describes how to specify a box as a destination and how to use the Direct Input tab.
Page 33
Note E-mail destinations are indicated by “E”, FTP destinations are indicated by “F”, and SMB destinations are indicated by “S”. 2-10 Saving documents C300...
Saving documents To save data to a box destination Press the [Scan] key in the control panel. The Scan mode screen appears. Touch [Address Book]. The registered destinations are displayed. Touch the button for the box where the data is to be saved. Why is [LDAP Search] not displayed on the Address Book tab? % If the “Manual Destination Input”...
Detail For details on the scan settings, refer to the User’s Guide [Network Scan- ner Operations]. To save data to the specified box Specifying the box where the data is to be saved directly from the control panel is called “direct input”. Press the [Scan] key in the control panel.
Page 36
Saving documents Select the box where the data is to be saved. Select the tab that con- tains the box where the data is to be saved, and then touch the button for the box. To specify a box number, touch [User Box Number], and then type in the number of the box.
Page 37
Touch [OK]. The Direct Input tab appears again. The number of the specified box appears under “Broadcast Destinations”. Why can’t the name of the document be changed after returning to the Direct Input tab? % To change the document name after returning to the Direct Input tab, touch [Document Name].
Printing a document from a public user box/personal user box Printing a document from a public user box/personal user box Displaying the Box mode screen The documents that can be printed from a box are those that were saved in the box from Copy or Fax mode or during computer printing.
Page 40
Printing a document from a public user box/personal user box From the Public User Box tab or the Personal User Box tab, touch the button for the desired box. Why does [Personal User Box] not appear? % The Personal User Box tab displays only boxes registered to the user that is logged on with user authentication.
Printing a document from a public user box/personal user box Reminder If “Prohibit Functions when Auth. Error” in Administrator mode is set to “Mode 2” and a box user enters an incorrect password the specified number of times, that box is locked out and can no longer use the ma- chine.
Printing a document from a public user box/personal user box Deleting document data To delete data Data that has already been printed or is no longer needed can be deleted. Select the document to be deleted. Touch [Delete]. Check the document information that appeared, and then touch [Yes] to delete the document.
Printing a document from a public user box/personal user box Changing the document name To change the document name The name of the saved document can be changed. Select the document to be renamed. Touch [Edit Name]. The current name appears beside “Document Name”. Type in the new name.
Printing a document from a public user box/personal user box Moving document data Note A document cannot be moved if multiple documents are selected. To move a document Document data currently saved in a box can be moved to a different public user box/personal user box.
Page 45
Printing a document from a public user box/personal user box Touch the button for the box where the document is to be moved. Is a password required for moving data to a different box? % It is not necessary to enter the password when moving data to a dif- ferent box, even if a password has been specified for the box.
Printing a document from a public user box/personal user box Copying document data Note A document cannot be copied if multiple documents are selected. To copy a document Document data currently saved in a box can be copied to a different public user box/personal user box.
Page 47
Printing a document from a public user box/personal user box Touch the button for the box where the document is to be copied. Is a password required for copying data to a different box? % It is not necessary to enter the password when copying data to a different box, even if a password has been specified for the box.
Printing a document from a public user box/personal user box Printing document data A document saved in a box from Copy mode, Fax mode or during computer printing can be printed. When printing the document, additional settings, such as those for the number of copies and double-sided printing, can be specified.
Page 49
Printing a document from a public user box/personal user box Detail The Fold & Staple settings are available only if saddle stitcher SD-503 is installed on optional finisher FS-514. The hole punch function is available only when optional finishers FS-514 and punch kit PK-510 are installed.
Printing a document from a public user box/personal user box To print a document Select the document to be printed. Touch [Print]. Check the document information that appeared. To check detailed information, touch [ To specify a setting, such as the number of copies, touch [Change Set- ting] under “Print”.
Printing a document from a public user box/personal user box To change the number of copies Specify the number of copies to be printed. The number of copies can be set between 1 and 999. Using the keypad, type in the desired number of copies. –...
Printing a document from a public user box/personal user box Specifying Finishing settings Select whether to sort or group the documents. In addition, Staple and Punch settings can also be specified. The following settings can be specified. Setting Sort Group Offset Staple Punch...
Page 53
Printing a document from a public user box/personal user box To separate the copies, touch [Offset]. Select the desired Staple and Punch settings. To specify the positions of the staples and punched holes, touch [Po- sition Setting]. Touch the button for the desired position. –...
Printing a document from a public user box/personal user box Folding the paper in half and binding it (Fold & Staple settings) The paper that is fed out can be folded in half and stapled at two places along the center. The following Fold &...
Printing a document from a public user box/personal user box Detail In order for the paper to be bound at the center or folded in half, all of the following conditions must be met. The paper width must be between 7-1/4 inch and 11-3/4 inch. The paper length must be between 10 inch and 17 inch.
Page 56
Printing a document from a public user box/personal user box To adjust the position, touch [Position Adjustment]. Adjust the stapling and folding positions. Touch [OK], and then touch [OK] in the next screen that appears. C300 3-19...
Printing a document from a public user box/personal user box Adding a binding margin The document can be printed with a binding margin. The following settings can be specified. Function Page Margin To specify the Page Margin settings Touch [Page Margin]. Select the desired position for the binding margin, and then touch [-] or [+] to specify the width of the binding margin.
Printing a document from a public user box/personal user box Adding cover pages (“Cover Mode” function) Documents can be printed with cover pages added to the front and back. First, load the paper trays with the paper for the front cover page and the back cover page.
Page 59
Printing a document from a public user box/personal user box Note If a setting for the “Cover Mode” function is to be specified when printing a copied document, either of the following conditions must be met when saving the document in a user box. A paper tray is specified.
Printing a document from a public user box/personal user box To specify the Cover Mode settings Touch [Cover Mode]. Select the desired cover page format. Specify the paper trays loaded with the paper for the front cover page and back cover page. Touch [Front Cover Paper] or [Back Cover Paper].
Printing a document from a public user box/personal user box Printing the date/time (“Date/Time” function) The printing date and time can be printed on all pages of the document. Settings can be specified for the following. Item Date Type Time Type Pages The following settings are available under “Pages”.
Page 62
Printing a document from a public user box/personal user box Under “Date Type”, select the format for the date. Under “Time Type”, select the format for the time. Under “Pages”, select the pages that the date/time is to be printed on. To change the printing position, touch [Print Position].
Printing a document from a public user box/personal user box Printing page numbers (“Page #” function) Page numbers can be printed on all pages of the document. Settings can be specified for the following. Item Start No. Page No. Type Insert Sheet Setting The following settings can be specified for printing on inserted pages.
Printing a document from a public user box/personal user box To specify the “Page #” function Touch [Stamp]. Touch [Page #]. Under “Start No.”, type in the starting page and chapter numbers. Under “Page No. Type”, select the page number format. If there are inserted pages, specify whether or not page numbers are printed on them.
Page 65
Printing a document from a public user box/personal user box Select how page numbers are printed on inserted pages, and then touch [OK]. To change the printing position, touch [Print Position]. Select the printing position. To make fine adjustments to the printing position, touch [Change Adjustment].
Printing a document from a public user box/personal user box Note The Chapter settings are applied only when “1-1, 1-2 ...” is selected un- der “Page No. Type”. Printing distribution numbers (“Set Numbering” function) Distribution numbers can be printed on all pages of the document. Settings can be specified for the following.
Page 67
Printing a document from a public user box/personal user box Touch [Set Numbering]. Under “Start Number”, use the keypad to specify the starting number. Under “Text Color”, select the desired color. Under “Pages”, select the pages that the distribution numbers are to be printed on.
Printing a document from a public user box/personal user box Printing a proof copy The contents of the document can be checked. Note A proof copy cannot be printed if multiple documents are selected. Print proof copies one document at a time. To print a proof copy Select the document to be proofed.
Printing a document from a public user box/personal user box Combined printing Multiple documents can be printed together. Up to 10 documents can be se- lected to be printed together. Additional settings, such as those for the number of copies, can be specified for the selected document.
Printing a document from a public user box/personal user box Detail Documents saved in a box and having a front cover, back cover and blank insertion in addition to Image Repeat and OHP Interleave settings specified cannot be combined and printed. The Fold &...
Printing a document from a public user box/personal user box The selected document is highlighted, and its bind number appears on the right side. Touch [Combine] in the lower-right corner. Check the document information that appeared. To check detailed information, touch [ To specify a setting, such as the number of copies of each document, touch [Print].
Printing a document from a public user box/personal user box To specify single-sided/double-sided printing Specify whether a single-sided or double-sided copy of the document is to be printed. Touch [1-Sided] or [2-Sided]. Specifying Finishing settings Select whether or not the copies are separated. In addition, Staple and Punch settings can be specified.
Printing a document from a public user box/personal user box To specify the Finishing settings Touch [Finishing]. To separate the copies, touch [Offset]. Select the desired Staple and Punch settings. To specify the positions of the staples and punched holes, touch [Po- sition Setting].
Page 74
Printing a document from a public user box/personal user box – If the “Corner” Staple setting is selected – If the “2 Position” Staple setting is selected Touch [OK], and then touch [OK] in the next screen that appears. C300 3-37...
Printing a document from a public user box/personal user box Folding the paper in half and binding it (Fold & Staple settings) The paper that is fed out can be folded in half and stapled at two places along the center. The following Fold &...
Printing a document from a public user box/personal user box Detail In order for the paper to be bound at the center or folded in half, all of the following conditions must be met. The paper width must be between 7-1/4 inch and 11-3/4 inch. The paper length must be between 10 inch and 17 inch.
Page 77
Printing a document from a public user box/personal user box To adjust the position, touch [Position Adjustment]. Adjust the stapling and folding positions. Touch [OK], and then touch [OK] in the next screen that appears. 3-40 C300...
Printing a document from a public user box/personal user box Printing the date/time (“Date/Time” function) The printing date and time can be printed on all pages of the document. Settings can be specified for the following. Item Date Type Time Type Pages The following settings are available under “Pages”.
Page 79
Printing a document from a public user box/personal user box Under “Pages”, select the pages that the date/time is to be printed on. To specify the printing position, touch [Print Position]. Select the printing position. To make fine adjustments to the printing position, touch [Change Adjustment].
Printing a document from a public user box/personal user box Adding a binding margin The document can be printed with a binding margin. The following settings can be specified. Function Page Margin To specify the Page Margin settings Touch [Page Margin]. Select the desired position for the binding margin, and then touch [-] or [+] to specify the width of the binding margin.
Printing a document from a public user box/personal user box Printing distribution numbers (“Set Numbering” function) Distribution numbers can be printed on all pages of the document. Settings can be specified for the following. Item Start Number Text Color Pages The following settings can be selected as the pages to be printed on.
Printing a document from a public user box/personal user box Under “Pages”, select the pages that the distribution numbers are to be printed on. Touch [OK], and then touch [OK] in the next two screens that appear. C300 3-45...
Printing a document from a public user box/personal user box Printing page numbers (“Page #” function) Page numbers can be printed on all pages of the document. Settings can be specified for the following. Item Start No. Page No. Type To specify the “Page #”...
Page 84
Printing a document from a public user box/personal user box Select the printing position. To make fine adjustments to the printing position, touch [Change Adjustment]. Specify the adjustment for moving the printing position up and down and to the left and right. Touch [OK], and then touch [OK] in the next four screens that appear.
Page 85
Printing a document from a public user box/personal user box 3-48 C300...
Routing a document from a public user box/personal user box Routing a document from a public user box/personal user box Editing document data From the Route tab, document data can be edited in addition to being rout- Function Delete Edit Name Move/Copy Description Data that has already been sent or is no longer needed can be...
Routing a document from a public user box/personal user box Routing Document data saved in a box from Scan mode or Fax mode can be sent via the network. The data can easily be routed by simply registering a destina- tion with this machine instead of by sending the data through different com- puters.
Routing a document from a public user box/personal user box Note If optional image controller IC-406 is installed, routing is not possible. Available settings The following settings can be specified. Setting Destinations Transmission method Document Info. File Type To route data Select the document, and touch [Route].
Page 90
Routing a document from a public user box/personal user box If necessary, check the document information and specify the data for- mat. Press the [Start] key in the control panel. Note To change the print settings specified with a program, select the destina- tion program, and then change the settings.
Routing a document from a public user box/personal user box Specifying destinations To specify a program as the destination Select the document, and touch [Route]. The Route screen appears. Touch [Select from Program]. Touch the button for the program where the data is to be sent. The button for the selected program appears selected.
Routing a document from a public user box/personal user box To select a destination from a group Select the document, and touch [Route]. The Route screen appears. Touch [Select from Group]. Touch the button for the group where the data is to be sent. The list of the addresses registered in the group appears.
Page 93
Routing a document from a public user box/personal user box Select the destinations. – To send the data to all addresses in the group, touch [Select All]. Touch [OK], and then touch [OK] in the next screen that appears. C300...
Routing a document from a public user box/personal user box To select a destination from the address book Select the document, and touch [Route]. The Route screen appears. Touch [Select from Address Book]. Touch the button for the destination where the data is to be sent. –...
Page 95
Routing a document from a public user box/personal user box Note If the “Manual Destination Input” parameter on the Security Details screen (displayed by touching [Security Setting] on the Administrator Setting screen) is set to “Restrict”, [LDAP Search] does not appear. Searching for a destination Follow the procedure described below to search for the desired destination.
Routing a document from a public user box/personal user box For an advanced search Reminder For details on an LDAP search and specifying settings for the LDAP serv- er, refer to the User’s Guide [Network Scanner Operations]. An LDAP search is possible only if “Select from Address Book” was se- lected.
Page 97
Routing a document from a public user box/personal user box Touch [E-Mail Direct Input]. A screen appears, allowing an address to be entered. Type in the e-mail address of the destination. To specify an additional address, touch [Next Dest.]. Touch [OK]. Note Frequently entered user names and domain names can be registered to be recalled and used again.
Routing a document from a public user box/personal user box Directly specifying an FTP destination The following settings can be specified for the FTP destination. Setting Host Name Destination Folder User Name Password To specify more advanced FTP settings, touch [Detail Setting]. Setting Port Number PASV mode...
Page 99
Routing a document from a public user box/personal user box Touch [File (FTP) Direct Input]. The Scan to FTP screen appears. Type in the information for the FTP server. To specify an additional FTP server, touch [Next Dest.], and then enter the information.
Routing a document from a public user box/personal user box Directly specifying an SMB destination The following settings can be specified. Setting Host Name Destination Folder User Name Password Reference To directly specify an SMB destination Select the document, and touch [Route]. The Route screen appears.
Page 101
Routing a document from a public user box/personal user box Type in the destination information. To specify an additional SMB server, touch [Next Dest.], and then enter the information. Touch [OK]. 4-16 C300...
Routing a document from a public user box/personal user box Checking settings before routing Checking the document information The following document information can be checked. Item Time Stored Job No. User Name Document Name To check information Select the document, and touch [Route]. The Route screen appears.
Page 103
Routing a document from a public user box/personal user box The Document Info. screen appears. Touch [ next screen of document information. Touch [OK]. 4-18 ] or [ ] to display the C300...
Routing a document from a public user box/personal user box Specifying the file format Data can be routed in the following file formats. Format TIFF JPEG Compact PDF In addition, there are settings for specifying how much of the saved data is converted.
Routing a document from a public user box/personal user box To specify the file format Select the document, and touch [Route]. The Route screen appears. Touch [File Type]. Select the format of the file to be sent and select the scan setting. 4-20 C300...
Page 106
Routing a document from a public user box/personal user box If “PDF” or “Compact PDF” was selected, touch [Encrypt]. Specify the encryption settings. Touch [OK], and then touch [OK] in the next screen that appears. C300 4-21...
Page 107
Routing a document from a public user box/personal user box 4-22 C300...
Routing a document from a system user Editing document data From the Route tab, document data can be edited in addition to being rout- Function Delete Edit Name Detail For details on creating annotation user boxes and saving documents in them, refer to the User’s Guide [Network Scanner Operations].
Routing a document from a system user box Routing Document data saved in an Annotation User box from Scan mode can be sent via the network. The data can easily be routed by simply registering a destination with this machine instead of by sending the data through differ- ent computers.
Available settings The following settings can be specified. Setting Destinations Transmission method Document Info. Edit Stamp Elements To route data On the System User Box tab, touch [Annotation User Box]. – The Annotation User boxes can also be used from the Public User Box screen.
Page 112
Routing a document from a system user box Select the document, and touch [Route]. – To select all documents, touch [Select All]. To deselect all docu- ments, touch [Reset]. A screen appears, allowing you to specify the destination. Specify the destination by using the programs and groups. If necessary, check the document information and specify the text.
Specifying destinations To specify a program as the destination Select the document, and touch [Route]. – To select all documents, touch [Select All]. To deselect all docu- ments, touch [Reset]. The Route screen appears. Touch [Select from Program]. Touch the button for the program where the data is to be sent. The button for the selected program appears selected.
Routing a document from a system user box To select a destination from a group Select the document, and touch [Route]. – To select all documents, touch [Select All]. To deselect all docu- ments, touch [Reset]. The Route screen appears. Touch [Select from Group].
Page 115
Select the destinations. – To send the data to all addresses in the group, touch [Select All]. Touch [OK], and then touch [OK] in the next screen that appears. Routing a document from a system user box C300...
Routing a document from a system user box To select a destination from the address book Select the document, and touch [Route]. – To select all documents, touch [Select All]. To deselect all docu- ments, touch [Reset]. The Route screen appears. Touch [Select from Address Book].
Touch [OK]. Note If the “Manual Destination Input” parameter on the Security Details screen (displayed by touching [Security Setting] on the Administrator Setting screen) is set to “Restrict”, [LDAP Search] does not appear. An LDAP search is possible only if “Select from Address Book” was se- lected.
Page 118
Routing a document from a system user box For an advanced search Reminder For details on an LDAP search and specifying settings for the LDAP serv- er, refer to the User’s Guide [Network Scanner Operations]. C300 5-11...
To directly specify the e-mail destination Select the document, and touch [Route]. – To select all documents, touch [Select All]. To deselect all docu- ments, touch [Reset]. The Route screen appears. Touch [E-Mail Direct Input]. A screen appears, allowing an address to be entered. Type in the e-mail address of the destination.
Page 120
Routing a document from a system user box Touch [OK]. Note Frequently entered user names and domain names can be registered to be recalled and used again. First, prefixes and suffixes must be regis- tered in Administrator mode. C300 5-13...
Directly specifying an FTP destination The following settings can be specified for the FTP destination. Setting Host Name Destination Folder User Name Password To specify more advanced FTP settings, touch [Detail Setting]. Setting Port Number PASV mode Proxy Note To select all documents, touch [Select All]. To deselect all documents, touch [Reset].
Routing a document from a system user box To directly specify an FTP destination Select the document, and touch [Route]. The Route screen appears. Touch [File (FTP) Direct Input]. The Scan to FTP screen appears. Type in the information for the FTP server. To specify an additional FTP server, touch [Next Dest.], and then enter the information.
Directly specifying an SMB destination The following settings can be specified. Setting Host Name Destination Folder User Name Password Reference Note To select all documents, touch [Select All]. To deselect all documents, touch [Reset]. To directly specify an SMB destination Select the document, and touch [Route].
Page 124
Routing a document from a system user box Touch [File (SMB) Direct Input]. The Scan to SMB screen appears. Type in the destination information. To specify an additional SMB server, touch [Next Dest.], and then enter the information. Touch [OK]. C300 5-17...
Checking settings before routing Checking the document information The following document information can be checked. Item Time Stored Job No. User Name Document Name Note To select all documents, touch [Select All]. To deselect all documents, touch [Reset]. To check information Select the document, and touch [Route].
Routing a document from a system user box The Document Info. screen appears. Touch [ next screen of document information. Touch [OK]. Changing the text Previously specified text or the count is set for annotation user boxes. This information can be changed while printing. Settings can be specified for the following.
To change the stamp elements Select the document, and then touch [Route]. The Route screen appears. Touch [Edit Stamp Elements]. The Edit Stamp Elements screen appears. Touch the button for the setting to be changed, and then change the setting. 5-20 Routing a document from a system user box C300...
Page 128
Routing a document from a system user box – Touch [Secondary Field], type in the text to be added, and then touch [OK]. – Touch [Date/Time], select the format for the date and time to be printed, and then touch [OK]. –...
Page 129
– Touch [Number Type], select the format for the numbering, and then touch [OK]. – Touch [Print Position], select the printing position, and then touch [OK]. Note To select all documents, touch [Select All]. To deselect all documents, touch [Reset]. 5-22 Routing a document from a system user box C300...
Control panel settings Specifying settings from the control panel Various basic settings and advanced parameters for using this machine can be set from the utility mode. this chapter describes the procedures for setting the utility mode parameters for the box functions. Note For details on registering bulletin board user boxes, refer to the User’s Guide [Facsimile Operations].
Control panel settings Additional information To log on to User mode as the box administrator, type “boxadmin” as the user name and type the password specified in “Specifying box administrator settings” on page 6-12. Operations that can be performed Operation Create boxes Box type Pub-...
Registering boxes New boxes can be registered. The following types of boxes can be registered. Type Public User Box Personal User Box Bulletin Board User Box Annotation User Box Note The mailbox transmission function can be specified for a box. If user authentication settings have been applied, be sure to type in the user name and password, and press the “Access”...
Control panel settings Registering public/personal user boxes The following information can be entered in each screen. Item User Box No. Name Password Index Type Auto Delete Document Advanced Functions Note If user authentication is canceled after personal user boxes are created, the personal user boxes become public user boxes.
To register a box Press the [Utility/Counter] key. Utility/ Counter Touch [1 One-Touch Registration]. Touch [3 User Box]. The User Box screen appears. Control panel settings C300...
Page 136
Control panel settings Touch [1 Public/Personal User Box]. Touch [New]. The registration screen 1/2 appears. Specify the desired box settings. Touch [Fwd.]. The registration screen 2/2 appears. C300...
Page 137
Specify the desired settings. Touch [OK]. Touch [Close]. The box is registered. Control panel settings C300...
Control panel settings Displaying the Administrator Setting screen To display the Administrator Setting screen Press the [Utility/Counter] key. Utility/ Counter Touch [3 Administrator Setting]. – An item in the Utility mode menus can also be selected by pressing the key in the keypad for the number beside the desired button. For “3 Administrator Setting”, press the [3] key in the keypad.
Page 139
Type in the password, and then touch [OK]. For details on typing in text, refer to “Entering text” on page 8-3. The Administrator Setting screen appears. Note If the optional fax kit is not installed, [8 Fax Setting] does not appear. To quit specifying the Utility mode setting, touch [Exit] in the sub display area or press the [Utility/Counter] key.
Control panel settings Specifying user box settings Boxes that are no longer needed should be deleted. To delete unused user boxes Boxes containing no saved documents can be deleted as unused boxes. In the Administrator Setting screen, touch [System Setting]. In the System Setting screen, touch [0 User Box Setting].
Specifying box administrator settings Select whether or not use by the box administrator is permitted. (The default setting is “Restrict”.) When logging on as the box administrator, type “boxadmin” as the user name in the user authentication screen, and then type in the password spec- ified in step 5.
Page 142
Control panel settings Touch the button for the desired setting. – If [Restrict] was selected, continue with step 4. – If [Allow] was selected, [Password] appears. Skip to step 5 to spec- ify the password. (The default password is “PASSWORD”.) Touch [OK].
Page 143
Detail For details on typing in text, refer to “Entering text” on page 8-3. Note To cancel the setting, touch [Cancel]. 6-14 Control panel settings C300...
Control panel settings Specifying HDD Setting parameters Various hard disk operations are available, such as those for erasing data from the hard disk and for checking the amount of free space on the hard disk. The following parameters are available. Parameter Check HDD Capacity Temporary Data Over-...
In the HDD Setting screen, touch [1 Check HDD Capacity]. The Check HDD Capacity screen appears. Touch [Close]. The HDD Setting screen appears again. Overwriting temporary data The setting for overwriting data on the hard disk can be specified. (The de- fault setting is “Mode 1”.) This machine destroys data by overwriting all data in the entire area where an image was stored when that image data on the hard disk is considered...
Page 146
Control panel settings In the HDD Setting screen, touch [2 Temporary Data Overwrite Setting]. The Temporary Data Overwrite Setting screen appears. If the security kit is not installed: If the security kit is installed: Select the method for overwriting temporary data. –...
Page 147
If a message appears, asking whether to reformat the hard disk, touch [Yes]. – To cancel changes to the settings, touch [No]. Follow the instructions in the screen to restart the machine. When an error message appears, indicating that the encryption key does not match, the Administrator Setting screen appears.
Control panel settings Overwriting all data The machine can be set to overwrite all data on the hard disk. With this procedure, all information on this machine is erased. Before performing this operation, be sure to consult with your service repre- sentative.
To overwrite all data In the Administrator Setting screen, touch [Security Setting]. In the Security Setting screen, touch [6 HDD Setting]. In the HDD Setting screen, touch [3 Overwrite All Data]. The Overwrite All Data screen appears. Select the desired method for overwriting data on the hard disk, and then click [Overwrite].
Page 150
Control panel settings To overwrite the data, touch [Yes]. – To return to the Overwrite All Data screen without overwriting the data, touch [No]. The message “Overwriting all data was completed. Turn OFF main SW and ON” appears. Follow the instructions in the screen to restart the machine. The data on the hard disk is overwritten.
To specify the hard disk locking password The password for locking the hard disk can be specified. The hard disk locking password is extremely important in order to protect the data on the hard disk. Keep the password in a safe place so that it will not be lost.
Page 152
Control panel settings Reminder Be sure to keep the password in a safe place so that it will not be lost. If the password is lost, significant restoration operations will be required for recovery. Note Do not specify a password that is 20 times the same character. Reminder Be sure to keep the specified password in a safe place so that it will not be lost.
To specify hard disk encryption If the security kit is installed, the machine can be set to encrypt the hard disk. The setting for the “HDD Encryption Setting” parameter must be specified by the machine’s administrator. [HDD Encryption Setting] appears when optional security kit SC-503 is in- stalled.
Page 154
Control panel settings The message “Turn the main switch OFF and ON.” appears. Follow the instructions in the screen and use the main power switch to turn off the machine. – When turning the main power switch off, then on again, wait at least 10 seconds before turning it on, otherwise the copier may not func- tion normally.
Page 155
In the Encryption Key failure screen, touch [HDD Format]. – If [Reset Encryption Key] is touched, the Register Encryption Key screen appears. If authentication of the encryption key failed, spec- ify the encryption key again. Restart the machine. The hard disk is encrypted. Reminder When turning the main power switch off, then on again, wait at least 10 seconds before turning it on, otherwise the copier may not function nor-...
Control panel settings To format the hard disk The hard disk can be formatted. When the hard disk is formatted, the data saved on the hard disk is erased. In the Administrator Setting screen, touch [Security Setting]. In the Security Setting screen, touch [6 HDD Setting]. In the HDD Setting screen, touch [6 HDD Formatting].
Page 157
Restart the machine. The hard disk is formatted. Reminder When turning the main power switch off, then on again, wait at least 10 seconds before turning it on, otherwise the copier may not function nor- mally. 6-28 Control panel settings C300...
Specifying settings using PageScope Web Connection Settings that can be specified using PageScope Web Connection PageScope Web Connection is a device management utility supported by the HTTP server integrated into the device. Using a Web browser on a com- puter connected to the network, machine settings can be specified from Pa- geScope Web Connection.
Specifying settings using PageScope Web Connection Administrator mode The following more advanced settings can be specified by the administrator. Setting User Box tab C300 Description Open User Box Operations, for example, to download or delete a saved document, can be performed after a box number has been specified.
Using PageScope Web Connection System requirements Item Network Computer applications Detail PageScope Web Connection is a device management utility supported by the HTTP server integrated into the printer controller. Using a Web browser on a computer connected to the network, machine settings can be specified from PageScope Web Connection.
Specifying settings using PageScope Web Connection Note If user authentication is enabled, a page for entering the user name and password appears before you can operate the machine. Structure of pages The page that appears immediately after PageScope Web Connection is ac- cessed is called the User mode page.
Page 163
Tabs Menus Information and settings Specifying settings using PageScope Web Connection Description Click the logo to go to the Konica Minolta Web site at the following URL. http://konicaminolta.com/ Click the logo to display the version information for PageScope Web Connection.
Specifying settings using PageScope Web Connection Web browser cache The newest information may not appear in the PageScope Web Connection pages because older versions of pages are saved in the cache for the Web browser. In addition, the following problems may occur when the cache is used.
Logging on and logging off When PageScope Web Connection is accessed, the page for a public user appears. In order to log on as a registered user or an administrator when user authentication is performed, it is necessary to log off first, then log on again. Logging off Note When logged on, a timeout occurs and you will automatically be logged...
Specifying settings using PageScope Web Connection The user is logged off, and the Login page appears. Logging on to User mode (Public User) There are two procedures for logging on to User mode: one for a registered user and one for a public user. If user authentication is not performed, log on as a public user.
Click [Login]. The User mode page appears. Note If “Flash” is selected as the display format, the following will appear using the Flash feature. Flash Player is required to use the Flash feature. Status icons and messages Page display when “Input Tray” is selected in the menu below “Device In- formation”...
Specifying settings using PageScope Web Connection To log on as a registered user/box administrator In the Login page, type the user name and the password. – To log on as the box administrator, type “boxadmin” as the user name and type the password specified in “Specifying box adminis- trator settings”...
Note If “Prohibit Functions when Auth. Error” in Administrator mode is set to “Mode 2” and a user enters an incorrect password the specified number of times, that user is locked out and can no longer use the machine. Con- tact the administrator to cancel operation restrictions.
Page 170
Specifying settings using PageScope Web Connection Type in the password for the machine’s administrator, and then click [OK]. The Administrator mode page appears. Reminder If “Prohibit Functions when Auth. Error” in Administrator mode is set to “Mode 2” and an incorrect administrator password is entered the speci- fied number of times, it is no longer possible to enter Administrator mode.
Opening a box (User mode) Files in boxes used with Box functions can be viewed, downloaded or delet- Opening boxes The list of boxes currently created and the list of data saved in those boxes can be viewed. Reminder If “Prohibit Functions when Auth. Error” in Administrator mode is set to “Mode 2”...
Specifying settings using PageScope Web Connection Public/Personal User Box List Item Page (Display by 50 cases) Search from Index Box list To open a box Select the box type, and then click [Next]. In the “User Box No.” box, type the box number. In the “User Box Password”...
Checking box information and downloading documents The basic box information and the list of documents saved in the box can be viewed. In addition, documents can be deleted, downloaded, renamed or moved/copied. Note The documents that can be downloaded are those saved in Scan mode. Box Detail Information Item Refresh to the new information...
Specifying settings using PageScope Web Connection Document List Item Document Name Time Stored Changing the box settings To change the box settings, click [User Box Setting] in the Box Detail Infor- mation page. C300 Description Displays the name of the document. Displays the date/time that the document was regis- tered.
Page 175
When changing the box attributes, specify information for the following, and then click [Apply]. Item User Box No. User Box Name Index Documentation Auto Delete Time User Box Password is changed. Current Password New Password Retype New Password User Box Owner is changed. User Box Type Owner Name Reminder...
Specifying settings using PageScope Web Connection Deleting a box The currently open box can be deleted. In the Box Detail Information page, click [Delete User Box]. Check the displayed information, and then click [OK] to delete the box. C300 7-19...
Creating boxes (User mode) New boxes can be created. Specify settings for the following when creating new boxes. For public/personal boxes Item User Box No. User Box Name User Box Password Retype User Box Password Index User Box Type Owner Name Documentation Auto Delete Time 7-20 Specifying settings using PageScope Web Connection...
Specifying settings using PageScope Web Connection To create a box Select the type of box to be created, and then click [Next]. Specify the necessary settings, and then click [Apply]. Reminder If “Password Rules” is set to “ON”, a password containing less than 8 characters cannot be registered.
Opening a box (Administrator mode) When logged on to Administrator mode, the settings of boxes can be changed or the boxes can be deleted without the box password being en- tered. Opening boxes The list of boxes currently created and the list of data saved in those boxes can be viewed.
Specifying settings using PageScope Web Connection To open a box Select the box type, and then click [Next]. In the “User Box No.” box, type the box number. Click [OK]. A list of the documents saved in the specified box is displayed. C300 7-23...
Changing the box settings To change the box settings, click [User Box Setting] in the Box Detail Infor- mation page. When changing the box attributes, specify information for the following, and then click [Apply]. Item User Box No. User Box Name Index Documentation Auto Delete Time User Box Password is changed.
Page 182
Specifying settings using PageScope Web Connection Reminder The following appear with personal user boxes. User Box Owner is changed. User Box Type Owner Name Reminder If “Password Rules” is set to “ON”, a password containing less than 8 characters cannot be registered. C300 7-25...
Deleting a box The currently open box can be deleted. In the Box Detail Information page, click [Delete User Box]. Check the displayed information, and then click [OK] to delete the box. 7-26 Specifying settings using PageScope Web Connection C300...
Specifying settings using PageScope Web Connection Creating boxes (Administrator mode) New boxes can be created. Only shared boxes can be created in Adminis- trator mode. To create a box Select the type of box to be created, and then click [Next]. Specify the necessary settings, and then click [Apply].
Specifying box administrator settings (Administrator mode) The box can be checked to see whether or not box administrator settings have been specified. Detail The box administrator can monitor documents in public and personal user boxes without a password. From the control panel of the machine or the Login page of PageScope Web Connection, log on with the ID “boxadmin”, and then type in the specified password.
Appendix Error message list If any of the following error messages appear, perform the operations de- scribed below. Message Cannot connect to the network. The destination cannot be selected because the number of destinations has exceeded the max. number of broadcasting possible.
Appendix Entering text The following procedure describes how to use the keyboard that appears in the touch panel for typing in the names of registered accounts and custom paper sizes. The keypad can also be used to type in numbers. Any of the following keyboards may appear.
Page 189
Touching [Shift] switches the keyboard display between lowercase letters (numbers) and uppercase letters (symbols). Appendix C300...
Appendix To type text Touch the button for the desired character from the keyboard that ap- peared. – To type in uppercase letters or symbols, touch [Shift]. – Numbers can also be typed in with the keypad. The entered characters appear in the text box. Note To cancel changes to the settings, touch [Cancel].
Glossary Term 10Base-T/100Base-TX/ 1000Base-T anonymous FTP Auto IP Bit-mapped Font Byte Compact PDF Contrast Default Default Gateway Density Density Adjustment DHCP Dither Definition An Ethernet standard, which is a cable consisting of twisted copper wire pairs. The transmission speed of 10Base-T is 10 Mbps, of 100Base-TX is 100 Mbps, and of 1000Base-T is 1000 Mbps.
Page 192
Appendix Term DPI (dpi) Driver Ethernet File Extension Gradation Grayscale Halftone Hard Disk HTTP Install IP Address J2RE Java JPEG C300 Definition Abbreviation for Domain Name System. A system that acquires the supported IP addresses from host names in a network environment. DNS allows the user to access other computers over a network by specifying host names, instead of difficult to memorize and under- stand IP addresses.
Page 193
Term Kerberos LDAP ® ® Macromedia Flash Memory Multi-Page TIFF PASV Pixel Plug-and-play Port Number Preview Print Job Property Protocol Definition A type of network authentication system used by Windows 2000 or later. Used in Active Directory authentication. Users can be safely and efficiently authenticated with a two-phase authentication (user logon and network resource usage) on a dependable site set up on the network.
Page 194
Appendix Term Proxy Server Resolution Scanning Screen Frequency Single-Page TIFF SSL/TLS Subnet Mask TCP/IP Thumbnail TIFF TWAIN Uninstall Web Browser C300 Definition A server that is installed to act as an intermediary connection be- tween each client and different servers to effectively ensure security over the entire system for Internet connections Displays the ability to reproduce the details of images and print mat- ter correctly...
Page 198
G This manual was printed using 100% post-consumer recycled paper. G This manual was printed with soy ink. http://konicaminolta.com Printed in China Copyright 9J06-9964-22 2006. 7 2006...